◆ PLC加人机界面，触摸式操作，方便简捷。
◆ 双高一低的塑化系统，高效节能，混炼出色。
◆ 中心入料，多型式的挤出模头，彻底清除制品汇合线，满足各种结构制品的要求。
◆ 双平行、平移模机构，中心锁模，平衡受力，移动迅速，到位平缓。
PLC adds the man-machine interface, the touching type is operated, it is convenient to be simple and direct. One pair of Iow plastification systems of Senior One, energy-efficient,mix and smelt outstandingly.
The centre enters the material, the pushing out of the mould head of many patterns, remove and make and converge the line completely, meet the demands of different structure products.
Two parallel, the mould organization of translation, the centre locks the mould, balance the strength of receiving,move rapidly, put it in place gentlely.
技术参数 Technical Specification |
名称 | Name | 单位 | 型号ABLB75II |
最大制品容积 | Max.product volum | L | 7．5 |
生产能力(空循环) | Dry cycle | PC/H | 800×2 |
螺杆直径 | Screw diameter | MM | 75 |
螺杆长径比 | Screw L/D ratio | L/D | 24 |
螺杆电机功率 | Screw drive power | KW | 22 |
螺杆加热功率 | Screw heating capacity | KW | 7 |
螺杆加热区段数 | No of heating zone | ZONE | 3/4 |
塑化能力( HDPE) | Output of HDPE | KG/H | 100 |
油泵电机功率 | Oil pump drive power | KW | 7．5-11 |
锁模力 | Clamping force | KN | 78 |
模板最大尺寸(宽x高) | Mold stroke | MM | 400×450 |
开合模行程 | Max size of mold | MM | 148-568 |
最大口模直径 | Max die diameter | MM | 160 |
吹气压力 | Blowing pressure | Mpa | 0.6 |
气体用量 | Air volume | M3/MIN | 0.8 |
冷却水压力 | Cooling water pressure | Mpa | 0.3 |
冷却水用量 | Water consumption | L/MIN | 80 |
机器外形尺寸 | Size of machine | LXWXH | 3．8×2.2×2.8 |
机器重量 | Weight of machine | TON | 8 |
