原装进口VA系列变截面玻璃转子流量计(图)
成都广控仪表设备有限公司
中国 成都
产品属性
图文详情
品牌推荐
品牌/型号
美国DWYER/VA系列
适用介质
气体或液体
测量范围
空气:49ml/min-44336ml/min（m3/h）m³/h
工作温度
121（℃）℃
工作压力
1.38（MPa）MPa
精度等级
2%
兼容性气体或液体,65mm和150mm,2%fs精度,流量计管身可换.范围比:10:1;20:1两个转子时,连接:两个1/8NPT内螺纹.阀门:6级控制针形阀(标准型),可选16级控制高精度阀门. Accurately measure flow rates of air, water, and other commonly used gases with the Series VA Variable Area Glass Flowmeters. Flowmeters are designed with an easy-to-read universal mm scale and supplied with a correlation chart containing calibration data for air and water. Correlation data for other gases and liquids are available. Permanently fused ceramic scale with vertical locator line reduces parallax and eye fatigue. Thick polycarbonate front shield protects tube from breakage and also serves as a magnifying lens to enhance reading resolution. Glass flowmeters are suitable for metering carrier gases, liquid and gas measurement in pilot plants, laboratories, process flow and level indicating. Units are equipped with a standard 6-turn needle valve for flow rate control. High precision metering valves with non-rising stems (sold separately) are available for high sensitivity control and resolution - particularly suited for very low flow rates. Flowmeters are shipped completely assembled and ready for panel mounting. Use an optional acrylic tripod base to convert to self-standing bench mounting. SPECIFICATIONS
Services: Compatible gases or liquids.
Wetted Materials:
Flowtube: Borosilicate glass.
Floats: Glass or stainless steel (sapphire, Carboloy and tantalum are optional).
Float Stops: PTFE.
End Fittings: Anodized Aluminum, 316 Stainless Steel or Brass.
Packings: Fluoroelastomer.
O-rings: Buna-N on aluminum models and brass models, and Fluoroelastomer on stainless steel models.
Temperature Limits: 250°F (121°C).
Pressure Limits: 200 psig (13.8 bar).
Accuracy: ±2% FS @ 70°F (21.1°C) and 14.7 psia (1 atm absolute).
Repeatability: ±0.25% full scale.
Scales: Universal 65 mm or 150 mm with correlation charts.
Turn-down Ratio: 10:1; 20:1 with combinations of two floats installed in meter.
Connections: Two 1/8 female NPT.
Mounting: Vertical.
Valve: 6-turn needle (standard), optional 16-turn high precision valve.
Valve Orifice: Acetal on aluminum models and brass models, PCTFE on stainless steel models.
Services: Compatible gases or liquids.
Wetted Materials:
Flowtube: Borosilicate glass.
Floats: Glass or stainless steel (sapphire, Carboloy and tantalum are optional).
Float Stops: PTFE.
End Fittings: Anodized Aluminum, 316 Stainless Steel or Brass.
Packings: Fluoroelastomer.
O-rings: Buna-N on aluminum models and brass models, and Fluoroelastomer on stainless steel models.
Temperature Limits: 250°F (121°C).
Pressure Limits: 200 psig (13.8 bar).
Accuracy: ±2% FS @ 70°F (21.1°C) and 14.7 psia (1 atm absolute).
Repeatability: ±0.25% full scale.
Scales: Universal 65 mm or 150 mm with correlation charts.
Turn-down Ratio: 10:1; 20:1 with combinations of two floats installed in meter.
Connections: Two 1/8 female NPT.
Mounting: Vertical.
Valve: 6-turn needle (standard), optional 16-turn high precision valve.
Valve Orifice: Acetal on aluminum models and brass models, PCTFE on stainless steel models.
