MFR-1160This system will allow users of the Metcal SP200 Soldering System to continue to use their Metcal SSC cartridges.Key Features & BenefitsSmartHeat® Technology provides exceptional power for high thermal demand applicationsHigh power output at a fixed temperature provides high throughput with excellent yieldsMFR-H6-SSC hand-piece has a comprehensive range of Metcal SSC cartridges for maximum flexibilityHand-pieces are ergonomic for operator safety and comfortMFR-1160 Single output, one cartridge soldering hand-piece, workstandPart No.DescriptionMFR-1160Single output, one cartridge soldering hand-piece, workstandSystem Components MFR-H6-SSCHand-piece, Metcal SSC Soldering CartridgeMFR-PS1100Power Supply, Single OutputWS2Auto Sleep WorkstandContents subject to change without notice
System does not include any tips or cartridges
Metcal SSC Solder Tip Cartridges
METCAL SSC SOLDER TIP CARTRIDGES500 SeriesX=5, 600 SeriesX=6, 700 SeriesX=7SSC-X17A
Extra Large Chisel
.21˜ (5.3mm)SSC-X13A
Chisel 90°
.13˜ (3.3mm)SSC-X36A
Chisel 30°
.10˜ (2.5mmSSC-X42A
Long Reach Chisel 60°
.07˜ (1.78mm)SSC-X70A
Long Chisel
.07˜ (1.78mm)SSC-X37A
Chisel 30°
.07˜ (1.78mm)SSC-X38A
Chisel 30°
.06˜ (1.5mm)SSC-X25A
Chisel 30°
.04˜ (1.0mm)SSC-X74A
Conical Sharp
.055˜ (1.4mm)SSC-X01A
Conical Sharp
.04˜ (1.0mm)SSC-X22A
Conical Sharp
.02˜ (0.51mm)SSC-X72A
Conical Chisel
.07˜ (1.78mm)SSC-X71A
Conical Chisel
.04˜ (1.0mm)SSC-X54A
Sharp Bent 30°
.02˜ (0.51mm)SSC-X26A
Sharp Bent 30°
.02˜ (0.51mm)SSC-X47A
Bevel 60°
.07˜ (1.78mm)SSC-X45A
Bevel 60°
.016˜ (0.4mm)SSC-X67A
Drag Soldering Tip
(Mini-Hoof)SSC-X61A
Drag Soldering Tip
(Knife)SSC-X39A
Drag Soldering Tip
(Hoof)SSC-X73A
Drag Soldering Tip
(Increased Tinned
Area, .24˜ 6.1mm)


MFR-1110, MFR-1120, MFR-1140, MFR-1160, MFR-1161

Input Line Voltage / Frequency:
100- 240 VAC, 50/60 Hz grounded circuit
Power Consumption:65 Watts maximum
Power Output Maximum:
60 Watts max. at 22°C
Output Frequency:450 KHz
Idle Temperature Stability:± 1.1°C (2°F)
Ambient Operating Temperature:
10- 40°C (50°F - 104°F)
Maximum Enclosure Temperature:55°C (131°F)
Power Cord 3-Wire:183cm (18/3") SJT
Hand-piece Cable Length:
L=122cm (48"), burn resistant, ESD safe
Hand-piece Connector:8-pin cicular DIN
Tip-to-Ground Potential:< 2mV
Tip-to-Ground Resistance:< 2 ohms
Certification / Marking:cTUVus, CE
Power Supply Dimensions w x d x h:
90mm x 142mm x 197mm (3.5" x 5.6" x 7.8")
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
Surface Resistivity:105-109Ohms

Weight:
MFR-PS1100:2.3 kg (5.05 lbs)
Hand-piece:0.12 kg (0.26 lbs)
Workstand:0.69 kg (1.51 lbs)
MFR-PS100 w/ hand-piece and workstand:
3.1 kg (6.84 lbs)


With hand soldering, the task is to make a quality solder connection, without damaging the substrate and without negatively impacting throughput. All of the standard MFR Series power tips & rework cartridges are designed for use with glass fiber (FR4) PCB substrates. This is denoted by the second letter in the part number: "F