成份报告如下：
C16含量：30.3
C18含量：69.21. Product and Company Identification Trade Name : MASCOL 68/30, MASCOL 68/30F, MASCOL 68/30P
Commercial Description : C16C18Fatty Alcohol
Manufacturer Name : P.T. Musim Mas2. Composition / Information On IngredientsComposition : Blend of 1-hexadecanol(cetyl) and 1-octadecanol (stearyl)
CAS Number : 67762-27-0
EINECS Number : 267-008-63. Hazards Identification
European Hazard Description : Not classified as dangerous according to directive 67/548/EEC
Potential Health Effects : Inhalation - No harmful effects expected under normal use. Dust may result
in slight irritation.
 Skin - May produce mild, primary skin irritation with prolonged or
repeated contact. Contact with heated material may cause burns. Eye - May cause mild irritation in contact with the eyes Ingestion - May cause gastrointestinal irritationPhysical/Chemical Hazards : Potential combustible dust if flaked or powdered.  Environmental Hazards : Not available4. First-Aid MeasuresInhalation : Avoid breathing dust. If inhaled, Provide fresh air. If not breathing
give artificial respiration. Seek medical attention immediatelySkin Contact : Immediately wash with soap and water upon contact. Remove
clothing if contaminated. If irritation persists, consult doctor.Eye Contact : If in contact, flush eyes immediately with plenty of water for least
about 15 minutes. Seek medical attentionIngestion : If swallowed, get medical attention immediately. Never
administer anything by mouth to an unconscious person. Induce
vomiting only under the instruction of a physician5. Fire-Fighting MeasuresExtinguisher Media : Use dry powder, or carbon dioxide for small fires, and foam for
large fires. Water spray is not recommended.Special Protective Equipment : Wear self-contained breathing apparatus and full protective
clothing
 6. Accidental Release Measures
Personal Precautions : Wear protective clothing and use suitable NIOSH/MSHA
approved respirators if dust, vapor or mist is generated.
Environmental Precautions : Do not allow to enter sewer, surface or ground water.
Leak / Spill : Absorb with liquid binding material (sand, diatomite, sawdust or
other universal binders). Use clean, non-sparking tools to collect
absorbed material. Dispose off in accordance with local, state
and federal regulation . 7. Handling and StorageHandling : Handle in accordance with good hygiene and safety procedures.
Avoid contact with eyes, skin and clothing. When transferring
materials, ground and bond containers. Use spark proof tools
and explosion proof equipment. Follow all hazards and warnings
and procedures even after container is emptied as it may contain
product residue and is still dangerous.Storage :    Keep away from heat, sparks or open flames. Keep away from
possible contact with incompatible substances. Store in a cool
dry place and in accordance with NFPA 30. Suitable storage
material is stainless steel, zinc coated or flaked polyester lined
containers   8. Exposure Control And Personal ProtectionEngineering Measures : Ventilation - local exhaust fan preferred; mechanical exha
necessary if working at elevated temperatures or
areas. Adequate ventilation is required to meet expHygiene Measure : Good industrial hygiene should be followedPersonal Protection : Eye              - Goggles or face shield with goggles, dependingexposure Skin  -  Protective gloves should be worn when handling hea Inhalation -  Nothing is required for normal use, although a Napproved respirator should be used if dust is produc