电源用金属化聚丙烯膜电容器
东莞市科尼盛电子有限公司
中国 东莞
产品属性
图文详情
品牌推荐
品牌/型号
TC/224K/275VAC P=15MM
额定电压
275（V）V
调节方式
固定
功率特性
大功率
频率特性
超高频
耐压值
275（V）
外形
方块状
APPLICATION FOR APPROVAL1.Item: Metallized Polypropylene Capacitor2.Type: MPX Series.
3.Specification.
a.Temperature Range
-40°C ~ 110°C
b.Capacitance.
0.001uF~1.0uF
c.Capacitance Tolerance.
K(±10%)M(±20%)
d.R.V.
275VAC
e.Dimension.
Refer to standard product list (Attached Pages). 4.Performance
TestARTICLEAPPLICATIONPERFORMANCETEST METHOD1AppearanceNo defectEye measurement or bydial gauge(Between terminals)Add a D.C.test VoltageNo defect,Self healable breakdownof 1200 V rated W.V for is not counted 60 sec 2Dielectric strength
The initial changing and
discharging currents at
testing voltage shall notexceed 1ABetween body and terminalAdd a D.C.test Voltage
no defect of 1200V rated W.V.for60secTest voltage: C≤0.33uF :15000MΩ MIN
275VAC for rated voltage 275VACInsulation C〉0.33uF :5000MΩ.uf MIN 3Resistance
4CapacitanceWithin the Specification.Measured with frequency 5Dissipation FactorThe tangent of loss amgle:≤0.1%1KHZ and 25°C
APPLICATION FOR APPROVALARTICLEAPPLICATIONPERFORMANCETEST METHOD6Tensile strength
1)No visible damage Tensile strength:load:1.0kg.2)No breaking or looseing of Duration of load application:terminal 60±5sec.
Bending strength:load:0.5kg.The number of testing time:twice1)No open and short circuit Variable frequency cycle:7Vibrationhappened .
10~55~10Hz/min2)No damage in element junction Amplitude
1.5 mm;Directionand appearance
x,y,z;each direction 2 hours.At least 75% of the circumference Solder temperature:245±5℃8Solderabilityof the immersed shall be covered Dipping time:2±0.5 secwith new solder.Dipping depth:2±0.8mm from the root of the terminal.1)No visible damage; In 260±5°C solder bath 9Resistance to 2)Capacitance change:within ±5%for 5 sec solding heat of initial value.1)Capacitance change:ΔC/C≤5%;Test in constant thermostatic 10Heat resistance2)The tangent of loss angle: oven after 2 hours depositchanged within 150% of initial reached temperatureequilibrum value at 1Khz85±2℃ thermostatic oven.3)IR≥30% of initial value1)Capacitance change:ΔC/C
3.Specification.
a.Temperature Range
-40°C ~ 110°C
b.Capacitance.
0.001uF~1.0uF
c.Capacitance Tolerance.
K(±10%)M(±20%)
d.R.V.
275VAC
e.Dimension.
Refer to standard product list (Attached Pages). 4.Performance
TestARTICLEAPPLICATIONPERFORMANCETEST METHOD1AppearanceNo defectEye measurement or bydial gauge(Between terminals)Add a D.C.test VoltageNo defect,Self healable breakdownof 1200 V rated W.V for is not counted 60 sec 2Dielectric strength
The initial changing and
discharging currents at
testing voltage shall notexceed 1ABetween body and terminalAdd a D.C.test Voltage
no defect of 1200V rated W.V.for60secTest voltage: C≤0.33uF :15000MΩ MIN
275VAC for rated voltage 275VACInsulation C〉0.33uF :5000MΩ.uf MIN 3Resistance
4CapacitanceWithin the Specification.Measured with frequency 5Dissipation FactorThe tangent of loss amgle:≤0.1%1KHZ and 25°C
APPLICATION FOR APPROVALARTICLEAPPLICATIONPERFORMANCETEST METHOD6Tensile strength
1)No visible damage Tensile strength:load:1.0kg.2)No breaking or looseing of Duration of load application:terminal 60±5sec.
Bending strength:load:0.5kg.The number of testing time:twice1)No open and short circuit Variable frequency cycle:7Vibrationhappened .
10~55~10Hz/min2)No damage in element junction Amplitude
1.5 mm;Directionand appearance
x,y,z;each direction 2 hours.At least 75% of the circumference Solder temperature:245±5℃8Solderabilityof the immersed shall be covered Dipping time:2±0.5 secwith new solder.Dipping depth:2±0.8mm from the root of the terminal.1)No visible damage; In 260±5°C solder bath 9Resistance to 2)Capacitance change:within ±5%for 5 sec solding heat of initial value.1)Capacitance change:ΔC/C≤5%;Test in constant thermostatic 10Heat resistance2)The tangent of loss angle: oven after 2 hours depositchanged within 150% of initial reached temperatureequilibrum value at 1Khz85±2℃ thermostatic oven.3)IR≥30% of initial value1)Capacitance change:ΔC/C
