北京长螺旋钻机型号｜长螺旋桩机图片｜雄飞桩工
全国免费咨询电话：400-6802-686 18632088769
长螺旋CFG-20； 长螺旋CFG-23 长螺旋CFG-26 长螺旋CFG-30
成孔直径/mm：400-800； 成孔直径/mm：400-800 成孔直径/mm：400-800 成孔直径/mm：400-800
动力头功率/kw:45*2； 动力头功率/kw:45*2； 动力头功率/kw:55*2； 动力头功率/kw:55*2；
成桩深度/m：20； 成桩深度/m：23 成桩深度/m：26 成桩深度/m：30
最大提拔力/kN：240； 最大提拔力/kN：400； 最大提拔力/kN：400； 最大提拔力/kN：400；
主机转速r/min：21； 主机转速r/min：21； 主机转速r/min：21； 主机转速r/min：16；
输出扭距/kN.m:39； 输出扭距/kN.m:39； 输出扭距/kN.m:48.5； 输出扭距/kN.m:63.7；
行走步距/mm：1500； 行走步距/mm：1500； 行走步距/mm：1500； 行走步距/mm：1800；
回转角度：90； 回转角度：90； 回转角度：90； 回转角度：90；北京长螺旋钻机型号｜长螺旋桩机图片｜雄飞桩工
桩机质量/T:40； 桩机质量/T:42； 桩机质量/T:50； 桩机质量/T:62；CFG桩 示意图CFG桩是英文Cement Fly-ash Gravel的缩写，意为水泥粉煤灰碎石桩，由碎石、石屑、砂、粉煤灰掺水泥加水拌和，用各种成桩机械制成的可变强度桩。通过调整水泥掺量及配比，其强度等级在C5-C25之间变化，是介于刚性桩与柔性桩之间的一种桩型。CFG桩和桩间土一起，通过褥垫层形成CFG桩复合地基共同工作，故可根据复合地基性状和计算进行工程设计。CFG桩一般不用计算配筋，并且还可利用工业废料粉煤灰和石屑作掺和料，进一步降低了工程造价。
产品特点：
1、桩机底盘高，钻出来的泥土在底盘下面，因此移位方便，就位准确。
2、前支腿窄后支腿宽，斜支撑形成倒三角型，回转时前支腿影响面积小，基坑边角容易钻桩。
3、整机重量大、过载能力强、保险系数高，工作时稳定可靠。
4、整机就位一次，同时可打两排4—6根桩，效率可提高百分之三十。
5、钻杆结构合理，材质好叶片厚，互换性强，同心度高。
6、采用多功能桩架，可挂其它动力施工，一机多用。
7、行走轮在履靴钢轨上行走，坚固耐用。
8、桩机底盘整体拖运，免除现场拆装连接过程。
9、有多种型式的钻头，可对付多种复杂地层施工。
10、滑板均装有尼龙套和尼龙板抗磨损，并保护滑道。
11、先进的液压步履式行走方式较长的行走步距，满足恶劣场地内的施工。
12、除此之外CFG23米（含23米）以下桩机；整个臂架及支腿全部折叠于机架上，运输时整体拖运。进入现场靠液压操纵，起落臂架方便快捷省时省力。主机滑轮已经绕好钢丝绳，组装时与动力头由一要销轴穿上便可开钻
联系电话：18632088769 全国免费电话：400-6802-686 网址:
The national free telephone advice: 400-6802-686 18632088769
Long spiral CFG-20; long spiral CFG-23 long spiral CFG-26 long spiral CFG-30
A hole diameter / mm : 400-800; a hole diameter / mm: 400-800 / mm: 400-800 into a hole diameter hole diameter / mm: 400-800
Head power / kW: 45 * 2; head power / kW: 45 * 2; head power / kW: 55 * 2; head power / kW: 55 * 2;
Pile depth / M: 20; pile depth / M: 23 pile depth / M: 26 / M: 30 pile depth
Maximum promoted force / kN: 240; maximum promoted force / kN: 400; maximum promoted force / kN: 400; maximum promoted force / kN: 400;
The engine speed r / min: 21; the engine speed r / min: 21; the engine speed r / min: 21; the engine speed r / min: 16;
Output torque / kN.m: 39; output torque / kN.m: 39; output torque / kN.m: 48.5; output torque / kN.m: 63.7;北京长螺旋钻机型号｜长螺旋桩机图片｜雄飞桩工
Walking distance of step / mm: 1500; walking pace / mm: 1500; walking pace / mm: 1500; walking pace / mm: 1800;
Rotary angle: 90 ; rotary angle: 90 ; rotary angle: 90 ; rotary angle: 90 ;
Pile machine quality / T: 40; pile machine quality / T: 42; pile machine quality / T: 50; pile machine quality / T: 62; CFG pile diagram CFG pile is the English Cement Fly-ash Gravel is an abbreviation for cement fly ash gravel pile, composed of gravel, stone, sand and fly ash mixed cement mixed with water, using a variety of piling machinery made of variable strength of pile.Through the adjustment of cement content and ratio, the strength grade of C5-C25 changes in between, is between rigid pile and pile between a pile type.CFG pile and soil between piles with cushion layer is formed by CFG pile composite foundation to work together, so it can be based on the behavior of composite foundation and calculation in engineering design.CFG pile is generally not reinforcement calculation, and may also utilize the industrial waste fly ash and crushed stone for admixture, further reducing the project cost.
Product features:北京长螺旋钻机型号｜长螺旋桩机图片｜雄飞桩工
1, pile machine chassis, drill out of the dirt below the chassis, so the shift is convenient, accurate positioning.
In 2, the front legs narrow rear legs wide diagonal bracing forming inverted triangle, turning the front leg impact area is small, easy to drill pile foundation pit edge angle.
In 3, the weight of large, strong overload capacity, high safety coefficient, stable and reliable operation.
In 4, the place once, at the same time can play two rows of 4 - 6 piles, efficiency can be increased by thirty percent.
Drill pipe 5, reasonable structure, good material thick leaves, strong interchangeability, high concentricity.
6, the multifunctional pile frame, can hang the other power construction, the use of a machine.
7, walking round in the boot of rail travel, durable.
8, pile machine chassis haulage, free of site disassembly process connection.
9, there are a variety of types of drill bits, can cope with a variety of complex strata construction.
In 10, skate are provided with the nylon sleeves and nylon plate wear, and protect the chute.
11, advanced hydraulic walk longer walking pace, meet bad site construction.
12, in addition to CFG23 meters (including 23 meters) below the pile machine; the arm and leg folded entirely on the machine frame, transportation as a whole haulage.Enter the scene by hydraulic control, the lift arm frame is convenient and time-saving.The host has been around the steel wire rope pulley, assembly and power head by a pin shaft can then be drilled
Tel: 18632088769 national free telephone : 400-6802-686 anxious lady北京长螺旋钻机型号｜长螺旋桩机图片｜雄飞桩工
