H824系列基本功能：

A.全液压系统,双油泵驱动，电机功率1.5KW。

B.台湾技术，深圳组装。

C.机床最大出力80KN

D.喉深600MM

E. C型高度410MM

F.行程200MM

G.上升高度位置调整系统，

H.恒压和保压延时系统。

I.驱动马达超负荷、缺相保护系统

J.下模座与架体连接可更换模块

K.防压手安全保护系统，安全与非安全转换功能。（非安全需二次确认功能）

L.设备压接范围（螺母、螺柱、螺钉）铁质材料M12以下，不锈钢材料M8以下。

H824 Department of basic functions:

A. hydraulic systems, double pump drive motor power 1.5KW.
B. Taiwan Technology, Shenzhen assembly.
C. maximum output 80KN machine
D. Throat depth 600MM
E. C-type height 410MM
F. trip 200MM
G. rising height position adjustment system,
H. Constant and Paul rolled the system.
I. drive motor overload, phase loss protection system
J. Block and the rack on the lower die connected modules can be replaced
K. Anti-pressure hand-security systems, security and non security conversion. (Non-security functions to be the second confirmed)
L. equipment crimping range (nuts, bolts, screws) M12 less iron materials, stainless steel M8 below.

可选配以下功能及配置：

PEM自动送料控制系统

A.通用型自动送料震盘

B.自动送料控制模块

C.采用气动模组控制原理

D. T型支架

E.真空泵

F.送料滑块机构

G.螺母上送控制系统

智能批次防漏铆提示模组

对每个产品铆接的螺丝数量设定后，在每加工完成一产品进行提示，如果产品的铆接次数与设定的铆接次数不相符时，防漏模组会停止机床并提示操作人员，同时带总批次加工产品的数量显示。有人工复位与自动复位俩种模式可选择。

手动工具套装

M3~M8（螺母、螺钉、螺柱）共22件套

J型钩、J型钩支架（可加工折弯后铆接功能）

自动送钉工具套装

螺母下送料系列、螺钉合螺柱上送料系列 （每款规格及外型不同的螺丝须选择相应规格工具）自动送钉工具按客户需求制定。

The following optional features and configurations:
Automatic feed control system for PEM
A. Universal Automatic feed tray earthquake
B. Automatic Feeding Control Module
C. Principle of pneumatic control module
D. T-type bracket
E. Vacuum
F. feeding slide mechanism
G. nut delivery control system
Intelligent Batch module leak prompted riveting
The screws on the number of each product riveting set, completion of processing a product in each prompt, if the product's riveting riveting set the number of times and do not match, the leak-proof module and prompts the operator to stop machine, while with The total number of batches processed products displayed. A manual reset and automatic reset two modes to choose from.
Hand Tools Set
M3 ~ M8 (nuts, screws, studs) a total of 22 sets of
J-hooks, J-type hook bracket (can be processed after bending riveting feature)

Automatically send nail kits

Series under the feed nut, screw studs on the co-feeding series (each a different size and shape specifications of the screw must select the appropriate tool) automatically send nail tools developed according to customer needs.