3M聚酰亚胺胶带3M1205
宋小姐13923720372 0755-86173511
3M1205 Tape
Polyimide Film With Acrylic AdhesiveData Sheet
Product Description
3M 1205 Tape is a 1-mil polyimide backing withacrylic adhesive. It is designed for high-temperatureapplications, in which a solvent-resistant backing isrequired, used on coils, capacitors and wire harnesses.
1-mil polyimide Kapton backing
Acrylic adhesive
Supplied on 3 inch cores
3M 1205 Tape is available in standard and custom widthsand lengths. Standard length is 36 yards.
Widths from 1/4” to 23”
Longer lengths up to several times normal length, dependent upon width. Check with CustomerService.
Applications
3M 1205 Tape is used for high-temperature electricalapplications in which a tough, thin insulating material thatis solvent resistant is required for wrapping coils,transformers, capacitors and wire harnesses. It is alsoused as a cover layer material for many types of flexibleprinted circuits.
任意宽度均可随时裁切。金额不足￥1000需增加5mm上机修边损耗费。 原装进口的库存是大料，一旦按您的要求裁切，就不方便撤单的哟。 深圳市君达电子有限公司 www.kingdays.com 0755-86173511 86173512 13691895131 13923720372 3M Electrical Tape 92 Polyimide Film Tape With ThermosettingSilicone Adhesive Product Description Applications UL Component Recognition Typical Properties Typical Values 3M Electrical Tape 1205 需上货
3M™ Electrical Tape 92 is a 1-mil polyimide film backing with silicone adhesive.
• 1-mil polyimide Kapton™ backing
• Silicone adhesive
• High temperature applications to 180°C
• UL510 Flame Retarded
Like all 3M insulating tapes, 3M 92 Tape is available in standard and custom widths and lengths. Standard length is 36 yards.
• Widths from 1/4” to 23”
• Longer lengths up to several times normal
length, dependent upon width. Check with Customer Service.
3M Electrical Tape 92 is used for high temperature electrical applications in which a tough, thin insulating material is required for wrapping coils, transformers, capacitors and wire harnesses. It is also used in printed circuit board assembly as a wave solder masking tape.
UL Recognized Flame Retarded per UL510. UL File Number E17385, Guide OANZ2. Underwriters Laboratories (UL) Recognized products are evaluated for use as components of end-product equipment that is Listed or Classified by UL. To achieve Underwriters Laboratories Recognition, component construction must meet UL specifications and conditions of acceptability for proper and safe use of the component or products.
Adhesive Thermosetting Silicone Backing Polyimide film
Backing Thickness 1 1.0 mil (0.025mm)
Total Thickness 1 3.0 mils (0.076mm)
Insulation Resistance 1 (megohms) > 1 x 106
Dielectric Breakdown 1 7,500 Volts
Breaking Strength 1 30 lbs./in (53N/10mm)
Elongation 1 (% at break) 55%
Electrolytic Corrosion Factor 3 1.0
Adhesion to Steel 1 25 oz/in (2.8N/10mm)
UL510 Flame Retarded 2 Yes
Printable Yes
