主要配置
Main configures:
主机： 采用德国最新外形设计，水冷循环系统有效保护磨粉腔内的温度，稳固的底座安装有四个避振脚。主机轴承品牌“NSK”，主电机为55KW，外加两个加油孔。
Drive motor:Host: The latest design in Germany, the effective protection of the circulatory system of water-cooled cavity milling temperature, a solid installed base of four feet to avoid vibration. Host bearing the brand "NSK", the main motor for the 55KW, plus a two-hole filling.
风机： 强力风速能有效地把磨出的产品快速吸走，并且起到冷却作用，电机11KW。
Blower motor: strong wind can effectively collect the powder and can cool it off. (11KW).
振动筛： 分上下两层，筛网为不锈钢，其余为普通钢材。平稳的安装在支架上，筛网可快速更换，电机1.1KW 。
Separation screen: pided into upper and lower layers. The net is stainless steel where it is touching the powder and lies on the stands. Separation screen can be changed quickly.(1.1KW)
振动喂料器：安装在料斗下部，可根据实际情况调节进料速度，与料接触部分为不锈钢
Vibrating feeder: installed under the hopper and feeding speed can be adjusted based on real situations. It is stainless steel where it is touching the powder.
关风机： 与旋风分离器紧密结合，防止强风把粉料吹起，污染空气。电机0.75KW
Flap motor: closely related with rotating separator to avoid blowing powders and to avoid polluting the air. (0.75KW)
电控箱： 根据IEC标准,自动 Y/? 启动柜,闭锁主开关与紧急停车。 电器开关品牌为正泰电器.380V 50HZ 。
lectronic Control Box: In accordance with IEC standard, automatic Y / ? Start cabinet, locking the main switch and emergency stop. Electrical switch electrical appliances brand Zhengtai .380 V 50HZ
磨盘: 直径500，材质：高速合金钢(真空热处理)
Disc: diameter 500, Material: high-speed steel (vacuum heat treatment)
旋风分离器：400毫米直径，材料为不锈钢。
Cyclone separator: 400 mm in diameter, It is stainless steel materials.
储料罐： 专门设计的喂料斗可通过人工或上料器来加料，材料为不锈钢。
Material storage tank: specially designed feed hopper can be manual or on the feeder to feed material for is stainless steel.
温控器: 能准确测出磨出粉料的温度,防止温度过高而引起的结块和塑化.
Thermostat: It can accurately measure the temperature of cavity milling to prevent excessive temperature to caking and plasticizing.
其它： 管路——与料接触的管路为不锈钢、方钢机架、快装接口等。
Other: pipeline - expected to come into contact with the pipe to stainless steel, square steel rack, quick interface.