■主要特点Features
1、采用变频器启动，启动平稳，分离因数可调。
2、吊袋卸料，劳动强度低，工效高。
3、结构设计合理，有效的消除了卫生死角，结构件过渡圆滑，表面经抛光处理，外部结构件、紧固件和转鼓都采用不锈钢制造。外壳为翻盖式，可对离心机外壳与转鼓夹层空间进行彻底清洗。
4、配置在线清洗系统，可对离心机进行在线清洗，对离心机外壳内壁、转鼓内外表面、集液槽表面等离心机内部不可见部位进行清洗。符合GMP规范中对设备的要求。
5、结构简单，操作维修方便。
6、晶粒不易破碎。
7、配置氮气保护系统，保证离心机内腔与外部空气隔离。
8、通用性强，适用范围广。
9、密闭结构，密封件采用硅橡胶或氟橡胶。可实现密闭防爆要求，适合于有毒和易燃、易爆场合的应用。
1、Frequency converter startup smooth starting. adjustable separation factor
2、Discharging solider from filtering bag is highly efficient with low labor intensity
3、Well-designed structure leaves no place depositing dusts and makes the surface The case, fixing parts and drums are made of stainless steel With hinged enclosure cover, it’s easy to clean the gap between the case and the drum
4、Automatic online cleaning system cleans the internal wall of the case, the drum and liquid slot to meet the clean requirements in accordance with GMP standards
5、Simple structure makes repairing easily
6、NO damage to the particles
7、Nitrogen protection system ensures segregating the air outside from the machine chamber
8、Wide range applications
9、Leak proof structure with silicone rubber or fluoroelastomers seats If is of anti-explosion applied to poisonous, flammable and explosive environment.
装置配置：
1、清洗喷淋系统。
2、氮气保护系统。
3、无基础形式（无基础底盘及减振垫）。
4、外部结构件（机座等）材料为不锈钢。
5、按用户所分离物料的防腐要求采用相应的不锈钢材料（SUS304、316、316L、321等）。
6、传动与制动：普通电机（或防爆电机）＋磨擦式自动离合器＋磨擦式手动制动装置。
1、Washing & cleaning spray system.
2、Nitrogen protection system.
3、Non-foundation form (Non-foundation chassis or Shock reduction cushion) .
4、Outside structure parts(such as machine chassis part)are made of stainless steel.
5、Choose the corresponding stainless steel(such as sus304.316.316L.321) according to the customers erosion proof requirement for separated material.
6、Transmission and brake, normal motor(explosion prevention motor) + friction type automatic clutch + friction type manual brake.
■标准配置Standard Manufacturing Form
1、结构：外壳配置翻盖及进料管、洗涤管、观察镜、排气口、照明孔；密闭结构，转鼓及外壳、翻盖等部件为不锈钢材料(SUS304)制造。机座等为铸造件，表面喷涂油漆。
2、所有紧固件为不锈钢件。
3、传动与制动：普通电机（或防爆电机）＋变频器＋能耗制动。
4、机器出厂时配专用吊具1套。
1、Structure Feeding pipe, Washing pipe, Observation window, Exhaust hole, Lightening hole have been applied in the turning over cover of the outshell. The sealing structure rotating drum, and outshell, turning over cover are all made of stainless steel (SUS304). Machine chassis parts are all made of cast material. The surface is sprayed with paint.
2、All tightening parts are made of stainless steel.
3、Transmission and brake: Normal motor (explosion prevention motor) + frequency modulator + power consumption brake.
4、Containing one set of packaging facility when the machine leaves this factory.
