产地：法国
生产商：RECYL
适用范围：陶瓷网纹辊，金属网纹辊及刮墨辊的深度清洗，可联机清洗或离线清洗。对水性油墨，溶剂型油墨，UV油墨及光油有效。可生物降解。
包装：塑料瓶，每瓶800克
使用说明：
1. 联机清洗（使用前请摇匀）
在网纹辊表面倒上RC2000，转动网纹辊使清洗剂均匀平铺于网纹辊表面，根据网纹辊污染程度保持10分钟至数小时。然后使用机器的供墨系统用清水或酒精将网纹辊表面冲洗干净。（请不要使用酸性液体）。
此过程应每周重复执行以避免网孔堵塞。
2. 离线清洗（使用前请摇匀）
戴好防护手套，将清洗剂在网纹辊表面平铺一层，根据网纹辊污染程度决定是否用缠绕膜包好。放置1至48小时后，用清水或酒精将网纹辊表面清洗剂擦干。（请不要使用酸性液体）。最后用高压力清水冲洗干净。
*如果网孔严重堵塞请重复以上过程。
本品刺激皮肤及眼睛。
若不慎接触皮肤或眼睛请立即用清水冲洗并咨询医生。
若不慎饮用请立即紧急就医。
陶瓷网纹辊清洗剂Ceramic Anilox Roll Cleaner
Producing Area:France
Producer:RECYL
Ranges of application:Ceramic anilox roll,metal anilox roll and squeegee roll’s deep cleaning.It is also suitable for online cleaning and off-line cleaning.It’s effective for water-based ink,solvent-based inks,UV inks and vamish .What’s more ,it can also be biodegradable.
Packing:Plastic bottles, 800 grams per bottle.
Instructions for use:
1. On-line cleaning (Shake well before use)
Pour the RC2000 on the surface of Anilox roll.Rotate anilox roll to make the cleaner spread evenly on the anilox roll’s surface.Mtaintain 10 minutes to a few hours according to the anilox roll pollution levels.Then use the machine’s ink supply system to rinse the anilox roll surface with water or alcohol(Don’t use acidic liquid).This process should be repeated weekly to perform in order to avoid clogging of the mesh.
2. Off-line cleaning(Shake well before use)
Put on protective gloves,spread a layer of cleaner on the anilox roll’s surface.Wether to use the stretch film bag according to the anilox pollutionl level.After placeing1 to 48 hours,use the water or alcohol to wipe the cleaner on the surface of the anilox roll(Don’t use acidic liquid).Finally you could use the high-pressure water rinse the anilox roll.If the mesh is severely clogged, repeat the above process.
This product may irritate skin and eyes.If it gets contact with skin and eyes,please rinse with water immediately and consult a physician.And please have emergency medical treatment immediately if you drink it.
