电缆桥架自动化生产线配套设备技术条件（伺服）
Automatic production line of cable rack (servo)
First cutting then roll forming
Main technical parameters
1.1设备技术条件
Technical parameters of machine
1.1.1设备占地面积： 38×3.5×5（长×宽×高）米。
Area of production line: length 38m x width 3.5m x height 5m
1.1.2设备进料方向：左进右出。
Feeding direction: from left side to right side
1.1.3电压参数380，50Hz，3相。
Power: 380V, 50Hz, 3 phase
1.1.4气源：流量为0.5m3/分钟；压力为0.7MPa。
Pneumatic station: pressure 0.-0.7MPa.,0.5M3/min.
1.1.5液压油：46#液压油。
Hydraulic oil: 46# Hydraulic oil
1.1.6齿轮油：18#双曲线齿轮油。
Gear oil: 18# gear oil
1.2设备主要技术参数
Main technical parameters
1.2.1 轧制带钢宽度：200—950 mm
Width of material sheet: 200-950mm
1.2.2 轧制带钢厚度：1.0~2.0 mm
Thickness of material sheet: 1.0~2.0 mm
1.2.3 轧制带钢材质：Q235冷轧带钢/ 热镀锌带钢
Material: cold steel coil/Hot steel coil
1.2.4 在线冲孔、生产速度：2-4m
Line speed with punching: 2-4 M/min
1.2.5 轧制工件长度：2000—6000 mm
Length of finished product: 2000-6000mm(2440/3000mm)
1.2.6 轧制的工件直线度误差1—1.5 mm /1500 mm
straightness tolerance of finished product: 1—1.5 mm /1500 mm
1.2.7 轧制的工件角度误差 ≤±1.5/1000mm
angle tolerance of finished product: ≤±1.5/1000mm
1.2.8电机防爆等级ExdIICT4
Anti-hazard classification of motor: ExdIICT4
1.2.9电机防护等级IP55
Grade of Protection of motor: IP55
1.2.10设备装机总容量：约94.5KW。
Total power: about 94.5KW
2.轧制产品范围
Forming product range
2.1最大厚度为1.0~2.0 mm电缆桥架
Cable tray, Maximum thickness: 1.0~2.0 mm
2.2产品宽度从100至600mm，
Width of product: 100-600mm
100mm/200mm/300mm/400mm/500mm/600mm (width)X 50mm
100mm/200mm/300mm/400mm/500mm/600mm (width)X 75mm
100mm/200mm/200mm/300mm/400mm500mm/600mm (width)X 100mm
3.供货及服务范围
Service for producing machine:
