本公司产品芯片都是采用进口台湾超高亮大尺寸晶片，产品制造过程采用净化,抗静电的国际标准设施封闭作业
。拥有业内最先进的ASM全自动固晶、全自动焊线设备及全自动封胶设备，产品检测选用台湾多功能电脑
自动分光分色设备处理
采用全自动化控制流程;1自动固晶2自动焊线3自动点荧光胶4自动灌胶5自动分光，分色
经过长时间高温老化:
高温老化，就是为了验证產品在高温环境下使用的期限。
Features：
●Pb free product—RoHS compliant
● Low power consumption,High efficiency
● Wide viewing angle, High intensity
● I.C. compatible/low current requirement
● Versatile mounting on p.c. board or pannel
● General purpose leads
Package Dimension:
Notes:
1.All dimensions are in millimeters .
2.Tolerance is ±0.20mm unless otherwise noted.
3.Protruded resin under flange is 1.0mm max
4.Lead spacing is measured where the leads emerge from the package.
5. Caution in ESD:
Static Electricity and surge damages the LED. lt is recommend to use a wrist band or anti-electrostatic glove when handling the LED.All devices, equipment and machinery must be properly grounded.
Absolute Maximum Ratings at Ta=25℃
Parameter | MAX. | Unit |
Power Dissipation | 150 | mW |
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) | 150 | mA |
Continuous Forward Current | 60 | mA |
Derating Linear From 50℃ | 0.4 | mA/℃ |
Reverse Voltage | 5 | V |
Operating Temperature Range | -40℃ to +85℃ | |
StorageTemperature Range | -40℃ to +270℃ | |
Lead Soldering Temperature [4mm(.157”) From Body] | 260℃ for 5 Seconds |
Electrical Optical Characteristics at Ta=25℃
Parameter | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
Luminous Intensity | Iv | 5000 | --- | 5500 | mcd | If=60mA (Note 1) |
Viewing Angle | 2θ1/2 | --- | 120 | --- | Deg | (Note 2) |
x | --- | 0.31 | --- | --- | IF=60mA (Note 3) | |
y | --- | 0.30 | --- | --- | IF=60mA (Note 3) | |
Forward Voltage | VF | 3.0 | --- | 3.4 | V | IF=60mA |
Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Luminous Intensity 光通量 | Iv | 18 | 19 | 20 | lm | 60MA |
Color Temperature 色温 | TC | 5500 | 6000 | 6500 | k | 60MA |
Note:
- Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
- θ1/2is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- It use many parameters that correspond to the CIE 1931 2°. X,Y, and Z are CIE 1931 2°values of Red, Green and Blue content of the measurement.
Typical Electrical / Optical Characteristics Curves
(25℃Ambient Temperature Unless Otherwise Noted)
