I-P-XD-5000VA Industrial Pure Sine Wave Inverter
(UPS) Specification
Digital Control Technology
Low Frequency Pure Sine Wave Inverter - Single-phase I-Panda
Interactive Uninterrupted Power Supply- High Quality
Function:
1, Auto Voltage Regulation(AVR): When utility power is unstable, this I-Panda 's machine owns
precise and stable voltage output function. For example, in China, the utility voltage can drop to
190V at peak demand, but the output voltage of this machine is 220 V±3% V, 50 Hz±0.5,
which can help to protect electrical equipment.

2, DC/AC Conversion Function: When the utility power fails suddenly in the home, office, supermarket
and industrial zone etc, it can be an environment-friendly engine; in some outdoor areas without
electricity, it can be used as Mobile Power and provide AC power for household appliances.

3, Intelligent Charging Function:. When batteries run out of power, inverter(I-Panda) can be
connected to the utility and automatically charge the battery.
When connected with utility and battery, it could be used as a UPS system and will charge batteries
automatically when connected with utility,The charging process can be pided into three sections.
Section I: With largest constant current charging, this can improve the backup power.
Section II: Constant voltage charging to charge batteries gradually, then there is enough time for
batteries to absorb energy .Therefore, battery electrodes are protected and battery overcharge can be
avoided.
Section III: When the batteries are fully charged, the output of inverter will turn into float voltage
to maintain full power state of batteries for a long time.

4. UPS Function: When this inverter(I-Panda) connected with batteries and utility,
inverter will start its UPS function.
Step 1: When utility power is available, it will output directly after stabilizing voltage
and charge batteries simultaneously.
Step 2: When utility power cuts off, the system (I-Panda)will convert DC power to AC power to ensure uninterrupted power supply.
Step 3: When utility power comes back, the I-P-XD 4000VA will turn into utility power supply automatically
within 5 ms and charge batteries simultaneously.

Features:
1, Pure sine wave AC output;
2, Intelligent program control, CPU management;
3, With LCD display, users can know operation status of the whole systemclearly;
4, With multi-functions, extra charger is not needed and electric appliances can
be protected (AVR, UPS);
5, Wide applicable scope, can be wide used for all kinds of occasions, such as outdoor area without
electricity, industrial area, household, office, supermarket, hospital, bank, solar system, wind energy systems
etc;
6, With external battery connection, the I-P-XD 500VA is convenient for users to
expand use time and back-up power time;
7, With super load carrying ability and high load capacity, this inverter(I-Panda) can not only carry
resistance load; but also can carry various kinds of inductive loads, such as motor, air conditioner,
electric drills, fluorescent lamp, gas lamp, etc;
8, With high quality, low frequency circuit design, stable system, low failure rate and long service life,normally under proper operation, this machine can last more than 3 years;
10, Approvals: CE / EMC / LVD/ RoHS ;I-Panda Professional power inverter.
11, Two years warranty, lifelong technical supports;
Technical Specification:
I-P-XD-5000VA | ||
Rated output capacity(Full Power) | 3500W | |
Peak Power | 7000W | |
Battery voltage(DC) | 24V or 48V (Optional) | |
AC Input | Voltage(AC) | 220V±35% or 110V+35%(Optional) |
Frequency | 50Hz±3% or 60Hz±3% | |
Output(AC) | Voltage | 220V±3% or 230V±3 or 240V±3% or 100V±3% or 110V±3% (Optional) |
Frequency | 50Hz±0.5 or 60Hz±0.5(Optional) | |
Charge Battery | Charge circuit | 0~20 A |
Charge time | By the capacity of battery | |
Battery protection | Automatic self-test. charge and discharge protection | |
Display | Mode | LCD |
Information | Input voltage, Output voltage, Frequency, Battery capacity, Load capacity State parameters | |
Output wave type | Pure sine wave (Waveform distortion≤3) | |
Overload capacity | 120% 60s,130% 10s, | |
Inverter efficiency | Average 90% | |
Transfer time | ≤ 5ms | |
Protection function | Output overload protection, Output short-circuit protection, Battery reverse polarity protection, Input high-voltage protection , Input low-voltage protections, Overheat protection; | |
Using environment | Temperature | -10℃~60℃ |
Humidity | 10%~90%,Non-condensing | |
Altitude | ≤4000m | |
Size W×D×H(mm) | 420*200*330 | |
Packing size W×D×H(mm) | 510*290*440 | |
Net weight (kg) | 40 | |
Gross weight (kg) | 43 | |
* We accept order with special specifications
* The specification is only for reference. Subject to change without prior notice.