TECHNICAL D
    
 
EASYPOXY(R) K-45
 
EASYPOXY(R) K-45 is a 100% solids, two-component, paste adhesive, mixed at a 1 to 1 ratio by weight or by volume and offers a qui
of 4-6 minutes at room temperature.  K-45 is designed for bonding steel, aluminum, glass, wood, cork, fabrics, ceramics, and most ha
Electrical insulation properties of K-45 are good and it has good optical clarity in thin bond lines.
 
Features  Benefits
1 to 1 Mix Ratio by Weight or Volume  Easy to use
Paste Consistency  Non-flow
24 Hour Cure Time  High production rate
 
TYPICAL PRODUCT CHARACTERISTICS
  (THESE ARE TYPICAL DATA AND ARE NOT MEANT TO SERVE AS SPECIFICATIONS)  
        
  K-45 Part A  K-45 Part B
Color  Clear  Amber
Viscosity  Light Paste  Light Paste
Solids Content  100%  100%
Specific Gravity @ 25C  1.16  1.19
Mix Ratio, parts by weight  100  100
 
 
TYPICAL CURED PROPERTIES
  (THESE ARE TYPICAL DATA AND ARE NOT MEANT TO SERVE AS SPECIFICATIONS)
Color  Light Amber
Flexibility  Semi-Flexible
Water Absorption, 24 hours Immersion  1.30%
Linear Shrinkage  1.00%
Tensile Shear Strength, psi  
  Etched AL/AL, 77F  2520
  Etched AL/AL, -67F  1800
  Etched AL/AL, 180F  440
Hardness, Shore D  85
Flexural Strength, psi  7800
Compressive Strength, psi  15,000
Tensile Strength, psi  3000
2 -4
Thermal conductivity, cal/sec/cm /C/cm x 10   5.0
Fungus Resistance  Non-nutrient
  
ELECTRICAL PROPERTIES
 
Dielectric Constant, 1 KHz @ 25C  4.10
Dissipation Factor, 1 KHz @ 25C  0.018
14
Volume Resistivity @ 25C, ohm-cm  2.5 x 10 
 
SURFACE PREPARATION
 
Apply to dry oil-free surfaces.  Remove mold release from plastic surfaces.  When bonding to metals, degrease and dry.  Chemical etc
metal surface gives optimum results.  For specific recommendations, request Cytec Surface Preparation Guide, Bulletin AC-107.
 
PROCESSING PARAMETERS