肯倍焊机FastMIG KMS 400 AS支持热启弧和电弧吹力控制 CC/CV特性

现场作业焊接表现非凡

FastMIG KMS400 AS焊机在现场焊接作业时性能易受影响，但FastMig KMS 400 AS焊机却并不如此。它在负载持续率为80％时的输出功率为400A，体积为0.58m³重量只有35kg，与其他相同类型焊机相比，性能无可匹敌。

FastMig KMS 400可用于MMA焊接，或作为优质MIG/MAG焊接的电源。在恶劣的焊接条件下，可与ArcFeed 200/300送丝机搭配为最佳拍档。 FastMig KMS 400 AS焊机和ArcFeed弧压感应送丝机组合无需控制电缆，只需一根电源线和一根地线。其现场焊接性能卓越。

产品概要

•高输出功率和负载持续率

•适用于直流MMA焊接和MIG / MAG焊接

•适用于发电机供电

•重量轻、结构紧凑，仅重35千克

FastMig KMS 400 AS 焊机的主要特点

FFastMig KMS 400 AS焊机操作简单明了，提供干净、高效的焊接。MMA焊接选择CC模式，MIG/MAG焊接选择CV模式。对使用肯倍 MSF/MXF送丝机的用户，FastMig KMS 400 AS为SF和SFW控制面板配备了全部功能，包括功能强大的Wise智能焊接软件。

KMS 400 AS的功能包括：

•电源计量

•C/CV焊接模式选择

•MA电弧力控制

•MIG/MAG动态调节

•启动功率控制

Why buy
• High output power and duty cycle
• For DC MMA and MIG/MAG welding
• Power generator compatible
• Light weight and compact, only 35 kg
KMS 400 AS features
include:
• Power source metering
• CC/CV process mode selection
• MMA Arc Force control
• MIG/MAG dynamics adjustment
• Start power control

Power all DC welding process

Site welding machines normally serve a little compromise in performance. Not so with FastMig KMS 400 AS. 400 amp at 80 % duty cycle, 0.58 m3 and weighing only 35 kg leaves most competitors in the cold – and that’s before you start comparing the welding performance.
Use FastMig KMS 400 AS for MMA welding or as a quality MIG/MAG power supply. The perfect partner for ArcFeed 200/300 tough case site wire feed units. FastMig KMS 400 AS and ArcFeed combination requires no control cable and only a single power cable and earth return lead. Excellent for site welding applications.
FastMig KMS 400 AS operation is clear and simple, providing clean,efficient welding results. Select either CC mode for MMA welding or CV for MIG/MAG welding. Arc tuning functions are available at the touch of a button including MMA arc force and MIG/MAG dynamics control. For the Kemppi MXF wire feed user, FastMig KMS 400 AS provides full functionality for SF and SFW control panels, including appropriate Wise welding processes.