功率:1 KW - 100千瓦。
1)超宽输入电压:285 V - 475 V
2)完全控制由CPU、LCD自动页码转向显示
3)对输出短路保护,对过载,当你摆脱它的负荷,它将转变对机组自动化。
4)工作了单相和三相。
110 V / 220 V单相;240 V / 380 V / 415 V / 440 V的选择。
五)经过充电器内置,其充电电流10 - - - - - - 156 A。
6)不同的直流volage:24 V、48 V、96 V,384 V为可选的
7),使得3 pc PCB盒、更稳定的设计。
8)这类逆变器可以带泵或解除,和其它工业用途
技术参数:
型号 | T80K |
| ||
功率 | 80KW | |||
功率因数 | 0.8 |
| ||
输入 | 相数 | 3相4线和地线 |
| |
电压范围 | 380V± 20%(3相),相电压220V |
| ||
频率范围 | 45 – 65Hz |
| ||
整流器 | 3 phase 6 pulses, 12 pulses is optional |
| ||
输出 | Phase | 3 phase 4 wire and ground |
| |
Wave form | Pure sine wave |
| ||
Crest Factor | 3: 01 |
| ||
Rated voltage | 380/400/415V optiona+ -1% for static load, 5% forfluctuant load |
| ||
Phase voltage setting | 200 - 244VAC, pls confirm when order |
| ||
Transient response | +/-5%, 10ms |
| ||
Frequency | 50 / 60 Hz + / - 0.05% |
| ||
Total-harmonic distortion | < 3% linear load, < 5%( nonlinear load) |
| ||
Short circuit current | Short current for 0.1s (200% current) |
| ||
Overload capacity | Overload 125% for 10 Mins, 125%-150% for 1min. automatically resume when load become normal |
| ||
Battery | Battery | Maintenance free lead-acid cell |
| |
DC Voltage | 384V |
| ||
Max Charge Current | 6-30A adjustable |
| ||
Bypass | Type | Static state + manual maintenance bypass |
| |
Input Phase | 3 phase 4 wire and ground |
| ||
Input voltage range | 15% - 25% (the front control panel selectable) |
| ||
Transfer time | Inverter / bypass transfer switch time(Overload): 0ms inverter / bypass transfer switch time (fault inverter) 1ms |
| ||
Efficiency
| Whole unit | > 85% |
| |
Inverter | 95 |
| ||
Remote signaling | Dry contact (battery low, battery discharging, bypass/ fault); output 12Vdc/80mA, Optional parts |
| ||
Communication interface | RS232 ( SNMP, modem optional ) |
| ||
Running temperature | 0-40 degree Celsius |
| ||
Relative Humidity | Less than 95% (without condensing) |
| ||
Noise at 1 M | less than 60 dB |
| ||
Degree of protection | IP20 |
| ||
Applicable Standards | EN50091-1-EMC EN50091-2liv. A |
| ||
