上海供应金属移印油墨/移印金属油墨/金属油墨《欧莱斯》
上海凯贤印刷科技有限公司
中国 上海
产品属性
图文详情
品牌推荐
品牌/型号
欧莱斯OLS
油墨特性：
拥有高光高色泽，主要用于金属表面、白铁表面、不锈钢表面、玻璃表面、UV表面、强化表面、电镀表面等材料上，具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
印刷：丝印移印均可。
表干及实干时间：表干时间自然挥发5-10分钟；实干时间在24小时以内(加专用固化剂)。
稀释及清洗：SV3慢干开油水、UVK1（移印开油水）同时可使用718洗网水清洗。
测试方法（完全干燥后）：
1、3m胶纸粘在画有百格的油墨表面，45度角迅速拉起不脱油;
2、纯度99%的工业酒精，一千克砝码用棉布包住在油墨表面，以水平力来回拉200次无脱色;
3、 耐磨：橡皮擦500g力水平来回擦500次。
使用方法：
1、使用前应充分搅拌，用后随时封闭；
2、搅拌时加开油水10-15%，稀释到印刷粘度如需自干加专用固化剂5%-10%.
3、网板塞网时可用洗网水清洗；
4、不得与其它类型油墨混合使用。
注意事项：
1、塑胶材料的外观相似，但可能会是不同的材料，客户需试印确定其符合要求后，再批量印刷；
2、在移印过程中，如出现拉丝或散开，可适当加入一些慢干膏即可;
3、环境温度过高，将会影响油墨原有质量；
4、根据气候变化，请远离火源，阴暗环境下存放
Scope of application:
Mainly used for metal surface, the tin surface, the surface of stainless steel, glass surface, UV surface, enhanced on the surface, electroplating and surface materials, with high color, high color, high hiding power, high stability, alcohol-resistant and wear-resistant rub the characteristics.
Free baking dry metal series ink
Ink properties:
Has a high light and high color, mainly used for metal surface, the tin surface, the surface of stainless steel, glass surface, UV surface, to strengthen the surface, electroplating and surface materials, with high color, high color, high hiding power, high stability, resistance to alcohol and abrasion characteristics.
Printing: Silk screen printing can be.
Is dry and the drying time: dry naturally volatile 5-10 minutes; drying time within 24 hours (plus special curing agent).
Dilution and cleaning: SV3 is slow dry oil and water, UVK1 (printing open water) at the same time use 718 wash water network cleaning.
Test methods (completely dry):
1,3 m, adhesive tape glued to the painted one hundred cell surface of the ink, the 45-degree angle quickly pull off the oil;
2, a purity of 99% of industrial alcohol, one kg weight with cotton wrap in the surface of the ink back and forth in the horizontal force to pull 200 decolorization;
3, wear: the eraser 500g force level rub back and forth 500 times.
How to use:
1, prior to use should be fully stirred, be closed after use;
2, stirring add 10-15% open water, diluted to printing viscosity For dry plus special curing agent 5% -10%.
3, the network board network plug can be washed in tap water to clean;
4 shall not be mixed with other types of ink.
Note:
1, similar to the appearance of plastic materials, but may be different materials, customers need to try to print to determine to meet the requirements, and then batch printing;
2, in the printing process, such as drawing or spread may be appropriate to add some cream to slow drying;
3, the ambient temperature is too high, it will affect the quality of the ink of the original;
4, according to the climate change, away from the fire source, stored in a dark environment.
Scope of application:
Mainly used for metal surface, the tin surface, the surface of stainless steel, glass surface, UV surface, enhanced on the surface, electroplating and surface materials, with high color, high color, high hiding power, high stability, alcohol-resistant and wear-resistant rub the characteristics.
Free baking dry metal series ink
Ink properties:
Has a high light and high color, mainly used for metal surface, the tin surface, the surface of stainless steel, glass surface, UV surface, to strengthen the surface, electroplating and surface materials, with high color, high color, high hiding power, high stability, resistance to alcohol and abrasion characteristics.
Printing: Silk screen printing can be.
Is dry and the drying time: dry naturally volatile 5-10 minutes; drying time within 24 hours (plus special curing agent).
Dilution and cleaning: SV3 is slow dry oil and water, UVK1 (printing open water) at the same time use 718 wash water network cleaning.
Test methods (completely dry):
1,3 m, adhesive tape glued to the painted one hundred cell surface of the ink, the 45-degree angle quickly pull off the oil;
2, a purity of 99% of industrial alcohol, one kg weight with cotton wrap in the surface of the ink back and forth in the horizontal force to pull 200 decolorization;
3, wear: the eraser 500g force level rub back and forth 500 times.
How to use:
1, prior to use should be fully stirred, be closed after use;
2, stirring add 10-15% open water, diluted to printing viscosity For dry plus special curing agent 5% -10%.
3, the network board network plug can be washed in tap water to clean;
4 shall not be mixed with other types of ink.
Note:
1, similar to the appearance of plastic materials, but may be different materials, customers need to try to print to determine to meet the requirements, and then batch printing;
2, in the printing process, such as drawing or spread may be appropriate to add some cream to slow drying;
3, the ambient temperature is too high, it will affect the quality of the ink of the original;
4, according to the climate change, away from the fire source, stored in a dark environment.
