批发二工防爆配电箱 防爆箱 防爆动力箱 防爆照明箱
二工防爆科技股份有限公司
中国 蚌埠
产品属性
图文详情
品牌推荐
品牌/型号
ERG二工电气/BMDX
适用范围Application
1、同时出现或分别出现爆炸性气体环境（1区、2区)和可燃性粉尘（20区、21区或22区）的危险场所。
2、场所中危险气体或蒸气：IIA、IIB
3、温度组别：T1～T6
4、户内、户外（防护等级IP65)
1、Hazardous area with explosive gas ( Zone 1＆2) and/or combustible dust (Zone 20＆21＆22)
2、Dangerous gases or vapors zone:IIA、IIB
3、Temperature classes:T1～T6
4、Indoor and outdoor(degree of protection IP65) 产品特点
1、外壳采用压铸铝合金铸造
2、表面喷塑
3、内装C65N (H)-C、C65N(H)-D、NC100H及类似小型断路器
4、C65N(H)-C优先适用于照明配电系统, C65N(H)-D优先适用于动力配电系统
5、具有过载保护功能
6、进出线腔，电器元件腔分别独立
7、输入：3P N PE输出：3P N PE或1P N PE
8、可根据要求特制
9、可钢管或电缆布线，电缆布线须配电缆夹紧密封接头
Features
1、Enclosure is made of casting aluminium alloy
2、Surface is sprayed with plastics
3、Built-in small breaker such as C65N(H)-C,C65N(H)-D,NC100H etc
4、C65N(H)-C is preferable for lighting distribution system and C65N(H)-D for power distribution system
5、With overload protection function
6、Inlet,outlet compartment and component compartment are independent from each other
7、Input:3P N PE, output:3P N PE or 1P N PE
8、For user′s requirements, it could be special by made
9、Wiring with conduit or cable ,For cable, it should be fitted with explosion-protected cable sealing connector主要技术参数Specification 型号含义Type designation 电气原理图Electrical principle chart 外形尺寸及示意图Outline dimensions 注：上面外形及表不适用于断路器电流大于63A或者材质为优质碳钢的情况。
Note: The outline and table above is not suitable for breakers with current more than 63A nor high quality carbon steel material.
1、同时出现或分别出现爆炸性气体环境（1区、2区)和可燃性粉尘（20区、21区或22区）的危险场所。
2、场所中危险气体或蒸气：IIA、IIB
3、温度组别：T1～T6
4、户内、户外（防护等级IP65)
1、Hazardous area with explosive gas ( Zone 1＆2) and/or combustible dust (Zone 20＆21＆22)
2、Dangerous gases or vapors zone:IIA、IIB
3、Temperature classes:T1～T6
4、Indoor and outdoor(degree of protection IP65) 产品特点
1、外壳采用压铸铝合金铸造
2、表面喷塑
3、内装C65N (H)-C、C65N(H)-D、NC100H及类似小型断路器
4、C65N(H)-C优先适用于照明配电系统, C65N(H)-D优先适用于动力配电系统
5、具有过载保护功能
6、进出线腔，电器元件腔分别独立
7、输入：3P N PE输出：3P N PE或1P N PE
8、可根据要求特制
9、可钢管或电缆布线，电缆布线须配电缆夹紧密封接头
Features
1、Enclosure is made of casting aluminium alloy
2、Surface is sprayed with plastics
3、Built-in small breaker such as C65N(H)-C,C65N(H)-D,NC100H etc
4、C65N(H)-C is preferable for lighting distribution system and C65N(H)-D for power distribution system
5、With overload protection function
6、Inlet,outlet compartment and component compartment are independent from each other
7、Input:3P N PE, output:3P N PE or 1P N PE
8、For user′s requirements, it could be special by made
9、Wiring with conduit or cable ,For cable, it should be fitted with explosion-protected cable sealing connector主要技术参数Specification 型号含义Type designation 电气原理图Electrical principle chart 外形尺寸及示意图Outline dimensions 注：上面外形及表不适用于断路器电流大于63A或者材质为优质碳钢的情况。
Note: The outline and table above is not suitable for breakers with current more than 63A nor high quality carbon steel material.
