■主要特点Features
1、采用变频器启动，启动平稳，分离因数可调。
2、吊袋卸料，劳动强度低，工效高。
3、结构设计合理，有效的消除了卫生死角，结构件过渡圆滑，表面经抛光处理，外部结构件、紧固件和转鼓都采用不锈钢制造。外壳为翻盖式，可对离心机外壳与转鼓夹层空间进行彻底清洗。
4、机座与机壳为整体焊接结构，承载强度高。
5、机座为平板式结构，降低了机器重心，安装空间更小，平板式机座又可作为操作平台，操作起来更方便。
6、配置液态阻尼减振器，更有效的消除振动，简化日常保养。
7、外壳翻盖，设置进料管、洗涤管、观察镜、照明孔。
8、配置在线清洗系统，可对离心机进行在线清洗，对离心机外壳内壁、转鼓内外表面、集液槽表面等离心机内部不可见部位进行清洗。符合GMP规范中对设备的要求。
9、结构简单，操作维修方便。
10、晶粒不易破碎。
11、配置氮气保护系统，保证离心机内腔与外部空气隔离。
12、通用性强，适用范围广。
13、密闭结构，密封件采用硅橡胶或氟橡胶。可实现密闭防爆要求，适合于有毒和易燃、易爆场合的应用。
1、Frequency converter startup smooth starting. adjustable separation factor
2、Discharging solider from filtering bag is highly efficient with low labor intensity
3、Well-designed structure leaves no place depositing dusts and makes the surface The case, fixing parts and drums are made of stainless steel With hinged enclosure cover, it’s easy to clean the gap between the case and the drum
4、The base and case are welded and joint together with high performance.
5、Platform base can lower the center of gravity and reducing the machine’s occupation of space the base can also been operation platform.
6、Liquid damping shock absorber, simplifying the routine maintenance
7、Hinged enclosure cover, feeding tube, washing tube, watching lens and lighting hole.
8、Automatic online cleaning system cleans the internal wall requirements in accordance with GMP standards.
9、Simple structure for convenient repair.
10、No damage to the particles.
11、Nitrogen protection system ensures segregating the air.
12、Wide range of applications.
13、Leak-proof structure with silicone rubber of fluoroelastomers seats. It is of anti-explosion with nitrogen protecting the machine inside.
■ 选装配置Device For Choice
1、结构：外壳配置翻盖及进料管、洗涤管、观察镜、排气口、照明孔；密闭结构，转鼓及外壳、翻盖等部件为不锈钢材料(SUS304)制造。
2、所有紧固件为不锈钢件。
3、传动与制动：普通电机（或防爆电机）＋磨擦式自动离合器＋磨擦式手动制动装置。
4、电控装置（控制箱）
5、液态阻尼减振器。
6、机器出厂时配专用吊具一套。
1、Structure Feeding pipe washing pipe, observation window，exhaust hole，lightening hole have been applied in the turning over cover or the outshell The sealing structure. rotating drum and outshell, turning over cover are all made of stainless steel (SUS304)
2、All tightening parts are made of stainless steel.
3、Transmission and brake normal motor(explosion prevention motor) + friction type automatic clutch + friction type manual brake.
4、Electrical control device(control box)
5、Liquid damping shock absorber.
6、Containing one set of packaging facility when the machine leaves this factory.
■ 标准配置Standard Manufacturing Form
1、在线清洗系统。
2、氮气保护系统。
3、按用户所分离物料的防腐要求采用相应的不锈钢材料（SUS304、316、316L、321等）。
4、过振动保护装置。
5、开盖保护装置。
6、现场防爆按钮。
1、On line washing system.
2、Nitrogen protection system.
3、Choose the corresponding stainless steel (such as SUS304. 316.316L. 321)according to the customers erosion proof requirement for separated material.
4、Over vibration protection system.
5、Cover opening protection device.
6、Local explosion proof panel.
■技术参数Technical Parameters
