本公司专业提供汽车诊断设备 检测设备 汽车读码卡 编程仪 钥匙匹配仪 OBD2 产品

联系电话：18025312287 QQ：407486918 黄生   

该产品软件有中文语言

诊断系统是雪铁龙与标志品牌通用的新一代诊断程序,本身包含了Diagbox、PPS、LEXIA三套诊断程序 ，基本上涵盖了标致雪铁龙所以车型，标致车型：106、107、205、206、207、306、307、308、309、405、408、407、408,605、607、806、807、1007、3008、4007、5008、ion、HOGGAR、RCZ、BIPPER、PARTNRT、EXPERT、BOXER等等。雪铁龙车型：富康、爱丽舍、世嘉、毕加索、赛纳、凯旋、AX、ZX、XM、BERLINGO、C1、C2、C3、C4、C5、C6、C8、C15、DS3、DS4、DS5等等。DIAGBOX

覆盖车型：107、1007、106、106R、205、206、306、306R、307、405、406、406R、406Coupe、407、605、607、806、807、PARTNER、EXPERT、BOXER等

检测功能：可检测东风标致和法国标致,ABS、天窗、影音系统等，并进行匹配、编程和远程诊断。

雪铁龙维修诊断软件PORXIA3,  PROXIA3中文操作语言，支持东风雪铁龙的全部车型，可进行编程，匹配，诊断等。4S站购买时，要配备平板电脑（工业电脑/触摸屏）和通讯模块。其通讯模块称为ICC通讯接口。支持雪铁龙所有车型和标志所有车型

覆盖车型：富康、爱丽舍、毕加索、赛纳、凯旋、AX、ZX、BERLINGO、C1、C2、C3、C4、C5、C6 C8、DS3等。

检测功能：可检测东风雪铁龙和法国雪铁龙汽车所有电控系统，如发动机、自动变速箱、防盗系统、安全气囊、自动空调系统、ABS、天窗、影音系统等，并进行匹配、编程和远程诊断。PORXIA3 4版软件是PORXIA3诊断系统最后一个版本，以后没有PORXIA3，被新型的LEXIA-3诊断系统所取代。

配置清单：(重量:1.5kg)

标致雪铁龙二合一诊断主机 1台

OBD-II诊断线 1条

USB线长短各一条 2条

诊断夹子     1条

标致雪铁龙诊断软件 1套

标致雪铁龙标贴   1套

PP2000/Lexia-3 Interface works for both Citreon and Peugeot.It compatible with most of Citreon and Peugeot cars from 1995.But not good for Peugeot 307 and Citreon C5.It support read identification,read fault codes,clear fault codes,auto-scan etc.Have multiple language for choose.

PP2000/LEXIA-3 Interface works for both Citreon and Peugeot!

Compatible Vehicles:

It compatible with Citreon cars including, C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on.But please pay attention,according to our customer's experience,this item can not works good at C5 new models.
It compatible with  most Peugeot cars from 1995,but it can not work good with Peugeot 307 after 2004 year.
If customer have this two types of cars,please pay attention.please check with us first before purchase.
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Supported functions
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

The following diagnostic functions are supported:
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Package includes:
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x Instruction for Installation and Activation DVD for PP2000

Language Inculding:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech