更多产品信息可来电咨询：周先生 13524226693 021-64286281
SFP+ 10Gigabit Ethernet:
10Gigabit Ethernet Adapter with SFP cage support:
-XR: Copper 10SFP+Cu (Passive Direct Attach Cable):
•
• Compliant with the SFP+ MSA SFF-8431 specification
• Up to 10 meters
-SR: Fiber 10 Gigabit Ethernet 10GBASE-SR:
•
• 10BASE-SR with 10Gigabit 850nM Small form Factor Pluggable (SFP+)
-LR: Fiber 10 Gigabit Ethernet 10GBASE-LR:
•
• 10BASE-LR with 10Gigabit 1310nM Small form Factor Pluggable (SFP+)
Fiber 10 Gigabit Ethernet 10GBASE-SR:
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)
•
10Gigabit 850nM Small form Factor Pluggable (SFP+)
•
Fiber 10 Gigabit Ethernet 10GBASE-LR:
10 Gigabit Fiber Ethernet port supports 10GBASE-LR (1310nM LAN PHY)
•
10Gigabit 1310nM Small form Factor Pluggable (SFP+)
•
Performance Features:
IPV4 and IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload
•
Fragmented UDP checksum offload for Packet Reassembly
•
CPU utilization- the 82599 supports reduction in CPU utilization, mainly by supporting Receive Side Coalescing (RSC).
•
Support for 16 virtual machine Device Queues (VMDq) per port
•
Support Direct Cache Access (DCA)
•
Advanced memory architecture reduces latency by preceding TSO packets. A TSO packet may be interleaved with other packets going to the wire
•
Minimized device I/O intterupts using MSI and MSI-X
•
Offload of TCP / IP / UDP checksum calculation and TCP segmentation
•
Large on chip receive packet buffer (512 KB)
•
Large on chip transmit packet buffer ( 160KB)
•
Supports the VPD (Vital Product Data) capability defined in the PCI specification ver. 3.0.
•
Time sync- IEEE1588- Precision Time Protocol (PTP)
•
Supports the BCN (Backward Congestion Notification) protocol
•
Common Key Features:
PCI Express ExpressModule Electromechanical Specification Revision 1.0
•
Support PCI Express Base Specification 2.0 (5 GTs)
•
IEEE 802.x flow control support
•
IEEE 802.q VLAN tagging support
•
Supports a mode where all received and sent packets have at least one VLAN tag in addition to the regular tagging
•
IEEE 802.1p layer 2 priority encoding
•
Jumbo Frame (up to 15.5KB)
•
Link Aggregation and Load Balancing
•
RFC2819 RMON MIB statistics
•
TCP Segmentation Offload Up to 256KB
•
Ipv6 Support for IP/TCP Receive Checksum Offload
•
DDP Offload
•
LEDs indicators for link/Activity
•
Hot Plug not supported. Can be supported by assembly change.
•
Low power
•
Security Features:
IEEE P802.1AE LinkSec specification. It incorporates an inline packet crypto unit to support both privacy and integrity checks on a packet by packet basis. The transmit data path includes both encryption and signing engines. On the receive data path it includes both decryption and integrity checkers
•
IPsec off load for a given number of flows
•
Off-load IPsec for up to 1024 Security associations (SA) for each of TX and RX
•
AH and ESP protocols for authentication and encryption
•
AES-128-GMAC and AES-GCM crypto engines
•
Transport mode encapsulation
•
SFP+ 10Gigabit Ethernet Technical Specifications Adapters
SFP+ (Small Form Factor Pluggable) supports:
SFI interfaces supports 10GBase-R PCS and 10 Gigabit PMA in order to connect with SFP+ to 10GBase-SR / / 1000Base-SX / 10GBase-LR and SFP+ Direct Attach
10GBase-SR SFP+:
IEEE Standard / Network topology:
Fiber 10Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY)
10GBase-SR SFP+:
Data Transfer Rate :
10.3125GBd
10GBase-SR SFP+:
Cables and Operating distance Up to:
62.5um, 160MHz/Km 26m
62.5um, (OM1)200MHz/Km 33m
50um, 400MHz/Km 66m
50um, (OM2)500 MHz/Km 82m
50um, (OM3)2000MHz/Km 300m
10GBase-LR SFP+:
IEEE Standard / Network topology:
Fiber 10Gigabit Ethernet, 10GBASE-LR (1310nM LAN PHY)
10GBase-LR SFP+:
Data Transfer Rate: 10.3125GBd
10GBase-LR SFP+:
Cables and Operating distance Up to: Single-Mode: 10000m at 9um
-SR: Fiber 10GBASE-SR Ethernet Technical Specifications:
Output Transmit Power:
Typical: -2.33 dBm
Minimum: -2.8 dBm
Optical Receive Sensitivity:
Typical: -13.45 dBm
Maximum: -11.1 dBm
Maximum Input Power: Maximum: +0.5dBm
-LR: Fiber 10GBASE-LR Ethernet Technical Specifications:
Output Transmit Power:
Typical: -2.75 dBm
Minimum: -8.2 dBm
Optical Receive Sensitivity:
Typical: -14.65 dBm
Maximum: -12.6 dBm
Maximum Input Power: Maximum: +0.5dBm
Operating Systems Support
Operating system support: Windows
Linux
FreeBSD
VMware
General Technical Specifications
Interface Standard: PCI ExpressModule Specification revision 1.0
PCI-Express Base Specification Revision 2.0 (5 GTs)
Board Size: 168.2mm x 98mm (6.62”X3.858”)
PCI Express Card Type: X8 Lane
PCI Express Voltage: +12V ± 15%
PCI Connector: Gold Finger: X8 Lane
Controller: : Intel 82599ES
Holder: Not included
I/O: LC located on internal bracket
Weight: 160gr (5.64 oz)
Power Consumption (SR): 6.72 W, 0.52A at 12V: Typical all ports operate at 10Gb/s4.92W, 0.41A: Typical No link at all ports
Power Consumption (LR): 7.08 W, 0.59A at 12V: Typical all ports operate at 10Gb/s
5.64W, 0.47A: Typical No link at all ports
Operating Temperature: -5°C – 40°C (23°F – 104°F)
Storage: -40°C–65°C (-40°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class A
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class A Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF*:
64 (Years)
*According to Telcordia SR-332 Issue 1
Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature - 25°C. Temperature rise of 10°C above the system ambient temperature was assumed for the cards components
LEDs
LEDs: (2) LEDs per port
Left LED: Link/Act :
Turns on link (Green),
Blinks on activity (Green)
Right LED : Link Speed:
Turns on Yellow 1G Link.
Turns on Blue 10G Link
LEDs location: LEDs are located on the PCB, visible via holes in the metal bracket. Each 2 green act/ link and speed link LEDs are located above their own SFP port- visible by light pipes.
Connectors: (2) LC
P/N Description Notes
M1E210G2SPi9-XR M1E210G2SPi9-XR:Dual Port SFP+ 10 Gigabit Ethernet ExpressModule Server Adapter X8, Based on Intel 82599ES, PCI-E ExpressModule, on board Support Silicom SFP+ approved transceiver, RoHS complian
M1E210G2SPi9-SR Dual Port Fiber (SR) 10 Gigabit Ethernet ExpressModule Server Adapter X8, Based on Intel 82599ES, PCI-E ExpressModule, on board support for Fiber SR, RoHS compliant
M1E210G2SPi9-LR Dual Port Fiber (LR) 10 Gigabit Ethernet ExpressModule Server Adapter X8, Based on Intel 82599ES, PCI-E ExpressModule, on board support for Fiber LR, RoHS compliant
1V1
