设备型号Device model |
单片焊接机HD900B型Single-type welding machine HD900B |
设备工作形式Forms of work equipment |
全自动单面焊接Automatic single-sided welding |
主体结构特点The main structural features |
结构紧凑 精度高速度快Compact High precision and high-speed fast |
进料形式Form feed |
自动移载 视觉系统自动检测Automatically set and detects the shift by using the visual system |
出料、翻转形式The form of discharge and turning |
自动移载到成品盒中Automatically transfer to the finished box set |
原料盒供给形式Supply form of Material box |
人工切换Manual switching |
涂锡带供给形式Supply form of Coated with tin |
自动供给 Automatic supply automatic bending |
助焊剂供给形式Supply form of Fluc |
助焊剂自动加注 涂锡带自动烘干Automatic filling flux With automatic drying coated with tin |
焊接方式The form of welding |
接触式焊接与非接触式焊接(任选) 温度自动控制Contact welding and Non-contact welding (optional) Automatic temperature control |
适用电池片规格Specifications for Cell |
125×125 156×156 (最小尺寸适应40mm左右) 厚度不小于0.16mm125×125 156×156 (An additional allocation of special tooling size pieces) Thickness of not less than 0.16mm |
适用涂锡带规格Tin coated with specifications |
厚×宽〔(0.18—0.20)mm×2.0mm〕特殊规格需定制Thick × Wide 〔(0.18-0.20) mm × 2.0mm〕be customized special specifications |
电池片排片定位系统CellPositioning System |
视觉(CCD)系统检测 PC及PLC控制机械手自动校正Visual (CCD) detection of PC and PLC control system, robot automatic calibration |
电池片排片精确度The accuracy of Cell arrangement |
偏差小于±0.2 mmDeviation is less than ± 0.2 mm |
废片筛查系统Scrapped cell Screening system |
视觉(CCD)系统筛查 PC及PLC控制机械手收集废片Visual (CCD) system screeningPC and PLC controlled robot to collect scrapped cells |
涂锡带搭载准确度Equipped with accurate of coated with tin |
偏差小于±0.2 mmDeviation is less than ± 0.2 mm |
最大串焊长度Maximum length of string welding |
—— |
焊接汇流条数量The number of bus-bar welding |
2—3条2-3 chips |
工作效率Efficiency |
约4-4.5秒/片(不包括换料盒、废片处理等时间)About 4-4.5 seconds / chip (not including refueling boxes, waste processing time) |
破损率Breakage ratio |
不大于0.30%(根据电池片质量而有所不同)Not more than 0.30% (based on the quality of solar cells vary) |
操控形式Control form |
人性化界面 触屏操作Human interface with touch screen operation system |
操作人员数量The number of operators |
每名操作人员可同时值守6-8台Each operator on duty at the same time6-8 units |
电源Power |
交流380V 约8kwAC 380V About 8kw |
气源Gas source |
额定不小于0.5MPaRated not less than 0.5MPa |
外形shape |
长2800×宽1100×高1800mmLength width 2800 × 1100 × 1800mm high |