RGB IR - CONTROLLER
This manual is the part of this product. It contains important information about the operaion and handling. Make sure even if the product to third parties professional secrecy. Always keep the manual for future reference!
Use only in closed rooms,not in outdoor, Contact with Moisture,eg. In the bathroom,must be avoided. Use like the description above will damage the product and this may be danger in short circuit fire,electric shock,etc..
The product may be changed of modified and the function will not be normal!
The safety note!
Batteries should not be treated as household waste. For more information on disposal be obtained from the city office,waste disposal service or the Producr purchased.
Safety
Damages caused by failure to comply with these instructions will invalidate Warranty!For consequential damages, the manufacturer accepts no liability to property or personal injury caused by improper use pr failure of Safety is caused. In such cases,the warranty is voided!
Security and certification(CE) are unauthorized conversion and modification the device is prohibited.
The power supply must be used in the technical data specified values correspond.
To make a proper start please follow the instructions. When setting up, make sure that the product cable is not pinched or sharp edges are not damaged. Keep the unit away from high temperature,strong vibrations,or moisture.
Commissioning
To ensure proper installation,you must read this Manual with the safety instructions thoroughly and carefully before using!
Maintenance
Periodically review the technical safety of the device, such as damaged cables or of the case.
If it can be assumed that safe operation is no longer possible, then the device out and removed from service and secured against ues. Power plug from the socket draw!
It can be assumed that safe operation is no longer possible, if the appliance has the device no longer works and after prolonged storage under unfavorable conditions, or after major transport stress close them as their first LED-Strip on the controller.
To prevent a short circuit, the power adapter must be connected in the last step.
Power supply：12/24V DC Power Supply or battery.
