Operation Instructions of Controller
I. Specifications:
Working temperature: -20-60 ℃
Supply voltage: DC12V
Product size: L62×W35×H23mm
Package size: L130×W60×H35mm
Net weight:60g
Gross weight:90g
Output: Three CMOS drain- open output
Connecting Mode: Common anode
Max load current: 2 A each color
II. Control Method:
Adopt IR remoter to control the led controller ,which has 24 buttons,the function of each button as the table below:
Brightness rise | Brightness fall | Pause/Run | On/Off |
Static red | Static green | Static blue | Static white |
Static orange | Static light green | Static dark blue | Static |
Static dark yellow | Static cyan | Static lyons blue | Static white pink |
Static yellow | Static light blue | Static purple | Static green-white |
Static light yellow | Static sky blue | Static brown | Static blue white |
Increase red | Increase green | Increase blue | Speed up |
Decrease red | Decrease green | Decreaseblue | Speed-down |
DIY key1 | DIY key2 | DIY key3 | Automaticchange |
DIY key4 | DIY key5 | DIY key6 | Flash on and off |
3 color jumpy change | 7 color jumpy change | 3 color fade change | 7 color fade change |
About DIY key, when it’s pressed first time, will enter the DIY color mode, you can adjust the color per the 6 keys at above to increase or decrease the R/G/B color by yourself freely（if other key is pressed this time，will jump out from DIY color mode）. And you can save the color which you have adjusted by pressing the DIY key once again. When next time this key is pressed, it will show the color you saved last time.
There are 6 DIY keys, so you can save 6 color you like. They are all Independent, have no effect each other. For example: if you press DIY key1 first, and then press DIY key2, DIY key1 will be invalid, until DIY key2 is pressed once again, current color will be saved.
III. Panel specification and connecting drawing as follows:
IV. Warning:
1. Supply voltage of this product is DC12V never connect to DC24V or AC220V.
2. Never connect two wires directly in case of short circuit.
3. Lead wire should be connected correctly according to colors that connecting diagram offers.
4. Warranty of this product is one year, in this period we guarantee replacement or repairing with no charge, but exclude the artificial situation of damaged or overload working.
