DESCRIPTION

EC-9519is a UV curable surface mount device encapsulant.EC-9519is usually syringe applied over surface mount devices to help prevent surface migration and to offer physical protection.EC-9519offers good adhesion & holding properties to most rigid & flexible substrates.

ADVANTAGES

ü Excellent adhesion

ü Superior flexibility

ü No dilution required

ü Fast curing

TYPICAL UNCURED PROPERTIES

Color

Viscosity

Total Solids Content

Density

Flash Point

VOC

Clear

4,000 CPS @ 25° C.

100 %

9.6 lbs/gallon

212^oF (100^oC) Tag Close Cup

0

TYPICAL CURED PROPERTIES

Hardness

TemperatureRange

50 Shore D

-40^oC to 120^oC

APPLICATION INFORMATION

EC-9519is usually applied by the use of a hand syringe or an automatic applicator.

CURE SCHEDULE

EC-9519The minimum cure energy recommended is 750 Millijoules per square centimeter.Complete cure can be confirmed by a crosshatch adhesion test.

CLEAN UP

EC-9519can be cleaned up with M.E.K (Methyl Ethyl Ketone) or any blend of solvents that will completely remove a cured film.

STORAGE AND HANDLING

• Shelf life is twelve (12) months in an unopened container, stored below 70^oF.
• Avoid exposure to direct sunlight. Avoid high temperature exposure.

HEALTH AND SAFETY

• Use with adequate ventilation.
• Avoid skin contact.
• If ingested, consult a physician immediately.
• Consult the product Material Safety Data Sheet for additional information.

APPLICATION ASSISTANCE

ECM’s application specialists are available to assist you in production start-up withEC-9519. For more information, please call ECM at 1.740.362.4444.