供应DID-05日本CEDAR思达数显扭力起子
上海富恺龙国际贸易有限公司
中国 上海
产品属性
图文详情
品牌推荐
| Specification | DID-05 | DID-4 | |
| Measuring range |
2.0 - 500 mN-m | 0.020 - 4 N-m | |
| 0.020～5 kgf-cm | 0.20～40 kgf-cm | ||
| 0.020～4.5 lbf-in | 0.20～35 lbf-in | ||
| Accuracy | ± 0.5% (in case of reading 499 or less = last digit +/- 3 reading) | ||
| Display | The 4 figures digital display of LCD | ||
| The measurement direction | CW-CCW (right and left) | ||
| Measuring mode |
P-P Peak | Holding Peak Load Value | |
| T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | ||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||
| C Real-time output |
Load torque value is outputted every about 1/ 160. | ||
| Decision function |
Setting of torque value | Programmable High and Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing | |
|
The Maximum, the minimum, and the average value |
Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) When outputting data,the cable(USB miniB) is needed. | |
| Data memory |
800 data / ten channels data | ||
| A setup of the number of counts | One to 99 count (count in a direction with a bundle) | ||
| Power supply | Ni-MH chargeable battery 1.2V×4cells 800mAh | ||
| Auto power save | 10 minutes no use, automatically switch off. | ||
| Charging time | From empty - less than 5hours | ||
| Continunous working time | 12 hours | ||
| Bit /Socket part | φ4 | HEX6.35 | |
| Weight | about 180g | about 400g | |
| Attachment | Bit （＋） ＃１ For one-wey ×1 For fixation×1 |
Bit （＋） ＃１ ＃２ | |
| Accessories (one piece each) |
AC/DC Adaptor (Charger) | ||
| An inspection report, a proofreading certificate, a traceability system figure | |||
