【功能特点】
1、 带防盗功能
2、 带收音功能
3、支持TF卡、U盘播放
3、 遥控对码功能
4、 循环播放音乐,断电后音量和当前音乐记忆功能
5、 工作电压:DC12V,喇叭功率:6Ω10W
【包装配置】
黑色喇叭一对
主机一台
防水黑色遥控一个
电源8P线一条
支架一对
罗丝8颗
说明书一张
本产品图文:
Motorcycleanti-theft digital mp3 (radio type) Instructions
Ⅰ.Products
This machine is the whole new generation of digital equipment to support remote control and anti-theft feature, mp3 support for SD memory cards and removable u disk, using high-fidelity stereo design, bring you a new music listening experience; easy to use, handy multi-function buttons; full aluminum body, texture excellent; with the cycle of music, and the current music volume after powerless memory function.
Ⅱ. Packing list
Product packaging includes the following components, please double-check to verify.
NAME AMOUNT
Host 1
6p cable 1
Remote control 1
Audio 1
Manual 1
Ⅲ. The basic operation
A. installation instructions
1. Mp3 format audio files will be kept of the u disk (flash drive) into the USB port or SD memory card inserted in the SD card connector.
2. Put the wire keys 5p into the jack on the left side of the mp3.
3. Put the power / audio cable 6p into the jack on the left of the mp3, the other side of socket access to DC 12v power supply. The red line with the insurance for the cathode tube, black line is negative.
B. Remote keys Function
1. In the shutdown, press the lock button, horn "beep" soon as 2 seconds backward that means into the anti-theft status. Then click again, horn "beep, beep" sound of two means unlock shutdown. When playing mp3 or radio presses the lock button if you want to shutdown.
2. In the shutdown open mp3, playing means put audio / sound, and let audio / radio conversion.
3. By or button 2 seconds is the up and down, the longer press is for adjusting the volume. When radio the downward and upward is for searching platform.
4. The product factory default value of the state is high sensitivity.
5. After press the lock key to hear the beep sound, go to the anti-theft status.
6. Hold down the 6 seconds longer after hear the sound of beep three times, the sensitivity will be reduced.
7. If the re-adjusted to the high state, repeated movements 5 or 6 times once heard a short toot sound on it.
C. Wire keys Function
1.Start / off: Long press the red button 2 seconds to put device to start playing music, while the red light lit, and then long press the red button 2 seconds again then close the player, while the red light off.
2. Pause: Press musical pause, and then again play.
3. Up / down: /
4. Adjust the volume: Long press "VOL+" volume gradually increases, long press “VOL-” volume gradually reduced.
D. When Playing mp3 flash slowly the light flash slowly and when pressing the key the light long.
Ⅳ. Notes
1. The players working voltage DC 12v. Voltage too high will damage player, the voltage too low, the player will not work properly.
2. When install the player, you must pay attention to water-proof, heat dissipation. Open the soft antenna.
3. The player supports vast majority of u disk and SD card, a few small u disk and SD card itself is unstable or too slow to not support it.
4. Host aluminum alloy casing is a power amplifier cooling components, the working temperature range of fever is normal.
Ⅴ. Specifications
Voltage: DC10-14V
Output: 2*10W/8
Output frequency range: 20 Hz—20 KHz
Remote Control Distance: open land≥100m
Operating temperature range: -30℃--+60℃
Ⅵ. Warranty fine regulation
The products sold by the host warranty for six months. (In addition to product defined outside the warranty period)Any of the following do not fall under the scope of the warranty.
1. The products beyond the warranty period
2. The customer fails to use the product manuals for installation and maintenance, such as the use of non-compliant power supply, improper storage, or the use of damage caused by out of the working environment.
3. The damage caused by self-demolition or alteration of hardware and software failures.
4. Water or man-made damage.
7. The damage caused by the natural disasters, force majeure factors, such as earthquakes, typhoons.
********
【注意事项】
(1)本播放器工作电压为直流12V。电压过高会损坏播放器,电压太低,播放器将不能正常工作。
(2)安装播放器主机时,必须注意要防水、散热。
(3)播放器支持绝大多数的U盘和SD卡,极少数U盘和SD卡本身不稳定或速度太慢的不支持。
(4)主机铝合金外壳是功放散热元件,工作温度范围内发热是正常的
注:此款产品报价为出口外贸专供价格。内销国内客户,请来电洽谈!0750-3610862 13827003528 QQ:512465700