JWCOM精微PSE101单POE供电器，POE单口供电模块 Single Port 24W Power Over Ethernet Adaptor PSE101 ( PoE injector) Features • Conforms to IEEE802.3af standard • Data and Power carried over one Ethernet Cable • Built in Adaptor • Power cable included • LED Indicating • RJ45 data Input interface Applications • IP Telephones • Security Camera • Wireless Network Access Points • IP Print Servers • Blue Tooth Access Point Mechanical Characteristics • Length: 123mm • Height: 40mm • Width: 61mm • Weight: 0.2Kg Output Specifications Model DC Output Voltage Load Regulation PSE101 48V Min. Max. Line Load 0A 0.5A ±4% Ripple And Noise* Vp-p* <500Hz 0.5 500Hz-150KHz 0.5 150KHz-500KHz 0.5 500KHz-1MHz 0.5 All specifications are subject to change without any pirior notice! PSE101 Characteristics INPUT: AC Input Voltage Range EMC 90 to 264VAC FCC Part 15 Class B AC Input Voltage Rating EN55022 Class B 100 to 240VAC Isolation Test AC Input Current Primary to Secondary: 3000VAC for 1 minute 10mA 0.5A(RMS) max. for 90VAC Primary to F.G.: 1500VAC for 1 minute 0.35A(RMS) max. for 240VAC Output to F.G.: 1500VAC Leakage Current Immunity EN50082-1 0.25mA max. @ 254VAC 60Hz ESD: EN61000-4-2. Level 3 AC Input Frequency RS: EN61000-4-3. Level 2 47-63Hz EFT: EN61000-4-4. Level 2 AC Inrush Current Surge: EN61000-4-5. Level 3 15A(RMS) max. for 115VAC CS: EN61000-4-6. Level 2 20A(RMS) max. for 230VAC Voltage Dips EN61000-4-11 OUTPUT: Harmonic: EN61000-3-2 Total Output Power Insulation Resistance 24W Primary to secondary: >10M OHM 500VDC Efficiency Primary to FC: &gt;10M OHM 500VDC 80% (typical) at Max. load, and 120VAC 60Hz FEATURE: Hold-up Time Over Voltage/Current, Short Circuit Protection 16mS min. 120VAC and max. load The output can be shorted permanently without damage Transient O/P Voltage Protection Indicators 60V max. at switch on and off at any AC line Phase Led indicator for power status ENVIRONMENTAL: Temperature Operation 0 to +40 °C Non-operation -25 to +65 °C Humidity Operation 5 to 90% Dimension Diagram Unit: mm