Pin number specified, inpidually guide processed, width specified series Flexible cable and discrete wiring type 0.3mm pitch CCJF Series
|
- Ultra-compact clip connector main body
- Flexible cable holding board (for rear surface
♦ Notice
An outsert nut is provided for fixation to tables, etc., which allows easier mounting and repetitive mounting/dismounting.
*M2.6 screws were used previously as the attachment screw, but it has now been changed to M2 screws.
Product name based on board
Circuit board for connectors on which pins on the odd-numbered side are positioned at the front: Symbol D
Circuit board for connectors on which pins on the even-numbered side are positioned at the front: Symbol R
Circuit board for discrete wiring:
Symbol P
Product no. differs according to circuit board
Three types of circuit boards are available: one for connectors on which pins on the odd-numbered side are positioned at the front, one for connectors on which pins on the even-numbered side are positioned at the front, and one for discrete wiring.
Referring to the examples below, append the corresponding circuit board symbol to the name of the product you are ordering.
[Example]
Specify symbol D if the odd-numbered side is at the front (left in the above diagram)
CCJF-030-25D
CCJF-030-39D-ZZ
Specify symbol R if the even-numbered side is at the front (middle in the above diagram)
CCJF-030-31R-ZZ
CCJF-030-6R
Specify symbol P for discrete wiring (right in the above diagram)
CCJF-030-23P
CCJF-030-29P-ZZ
*Please check the required wiring method in the section, "Wiring method" on
the Clip Connector Inquiry Sheet.
