双层滤池专用无烟煤滤料
无烟煤滤料产品说明:
无烟煤滤料是目前普遍采用的过滤材料,同石英砂滤料配合使用是我国目前推广的双层快速滤池和三层滤池、滤罐过滤的常见形式。是提高滤速增加单位面积出水量和成倍提高截污能力,降低工程造价和减少占地面积最有效的途径。广泛应用于化工、冶金、热电、制药、造纸、印染、食品等的生产前后的水质处理过程中。
无烟煤滤料产品详情:
无烟煤滤料是一种水处理行业过滤用滤料。
无烟煤滤料是采用优质无烟煤为原料,经精选碎,粉,筛等工艺
无烟煤滤料在过滤过程中所起作用的好坏,直接影响着滤过的水质,故对此
滤料的选择必须达到以下几点要求:
1、机械强度高,破碎率和磨损率之和不应大于3%(按重量计)。
2、化学性能稳定,不含有毒有害物质。在一般酸性、碱性、中性水中均不溶解。我厂产品经中国水处理滤料监督检测中心测定:盐酸可溶率为0.98%(部颁标准为3.5)在各类水源中均可达到良好的净化效果。
3、粒径级配合理,比表面积好。产品外观呈球状而有棱角,光泽度好,经机械振动三次筛分,级配符合有关技术指标。
4、粒径范围小于指定下限粒径按重量计不大于3%,大于指定上限粒径按重量计不大于2%。
无烟煤滤料填充注意事项和操作要求:
1、滤料在填充前必须将滤池(滤器)内部清扫干净。
2、要均匀地铺设每层滤料,当达到标定厚度时,必须耙平滤料。
3、滤料长期运行,会有磨损。如操作不当会有“跑料”发生。为此需定期检查滤料状况,如有亏料情况,需及时补充。如滤料运行时间过长,出水水质长期不清,或滤层发生乱层,则需更换或重新级配滤料。
加工而成是普遍采用双层,三层快速过滤材料。实用于一般酸性,中性碱性的净化处理,具有良好的比表面积,各项指标均达到建设部(CJ/T44-1999)标准。无烟煤滤料是特别从深井矿物中精选的,具有最高的含碳量百分比。
无烟煤滤料采用人工分类,可减少无关矿物质并降低灰分含量。还经过过滤和冲洗,确保其适合水过滤之用。 由于具有较好的固体颗粒保持能力,因此无烟煤能够可靠地提高悬浮颗粒清除能力。 此外,它的均匀系数较低,有助于加快流速。
无烟煤滤料理化指标:
分析项目 | 鉴定数据 | 分析项目 | 鉴定数据 | 分析项目 | 鉴定数据 |
比重 | 1.57 | 大于1.8g/cm3物质 | ≤3% | S含量 | 0.05% |
容重 | 0.947t/m3 | 盐酸可溶率 | 0.98% | Pb含量 | 0.045% |
破碎率 | ≤0.68% | 孔隙率 | 51.99% | Cu含量 | 0.025% |
磨损率 | ≤0.32% | 均匀系数 | K60≤2.0 | Zn含量 | 0.04% |
灰粉 | ≤1.0% | 不均匀系数 | K80≤1.5 | 燃烧值 | 6800Kee/kg |
密度 | 1.57g/cm3 | 含泥量 | ≤0.52 | 其它重金属含量 | 不超过国家饮用水标准 |
固有水分 | ≤1% | C含量 | ≤90% |
一、【无烟煤滤料】俗称“白煤”,是煤化程度最深的煤。是一种水处理行业过滤用材料。宁夏明阳活性炭有限公司生产的无烟煤滤料(执行标准:中华人民共和国城镇建设行业标准(CJ/T43-2005)是选用宁夏优质无烟煤为原料。经破碎、筛分、水洗加工而成。特点是:固定碳含量高、密度大、强度大、外观光泽度好、化学性能稳定、具有较好的固体颗粒保持能力,能可靠的提高悬浮颗粒的清除。不含有毒有害物质。在酸性、中性水中均不溶解。抗压耐磨性强,有足够的比表面积和合理的粒径级配。由于具有较好的固体颗粒保持能力,因此能够可靠的提高悬浮颗粒清除能力。适用于生活饮用水及工业用水的过滤
二、无烟煤滤料技术要求
1、无烟煤滤料的破碎率和磨损率之和不应大于3%(百分率按质量计,下同)。
2、无烟煤滤料的平均密度一般不小于1.4g/cm3,不大于1.6g/cm3。
3、无烟煤滤料应不含可见泥土、页岩和外来碎屑。含泥量不应大于3%,密度大于
1.8g/cm3的物质含量不应大于8%。
4、无烟煤滤料的盐酸可溶率不应大于3.5%。
三、【无烟煤滤料】的粒径
1、用于生活饮用水的无烟煤的粒径范围为:0.8-1.2mm、1.2-2mm;工业用水无烟煤的粒径范围为:1-2mm、2-4mm、4-6mm。
2、在各种粒径范围的无烟煤中,小于指定下限粒径的不应大于3%,大于指定上限粒径的不应大于2%。
产品包装:25公斤编织袋包装,内膜外塑,包装上可印刷客户提供资料。
Anthracite filter material product description
Anthracite filter material is widely used at present the best filtration material, with quartz sand filter material used in conjunction with China is the promotion of double rapid filter and three layer filter, filter can filter the common form. Is to improve the filter speed increase unit area water yield and doubled section carrying capacity, reduce the project cost and reduce covers an area of the most effective way. Widely used in chemical industry, metallurgy, thermoelectric, pharmaceutical, paper making, printing and dyeing, food and so on production before and after the water treatment process.
Anthracite filter material product details
Anthracite filter material is a kind of water treatment industry for filter filter material.
Anthracite filter material is produced with high quality anthracite coal as raw material, the selected broken, powder, screen technology
Anthracite filter material in the filtering process action is good or bad, a direct impact on the filtered water quality, so the choice of this filter material must meet the following requirements:
1, high mechanical strength, the broken rate and the wear rate of the should be greater than 3% (by weight meter).
2, stable chemical performance, does not contain the poisonous and harmful material. In the general acid, alkaline and neutral water are insoluble. Our products has been approved by the China water treatment filter material supervision and inspection center determination: hydrochloric acid soluble rate was 0.98% (ministerial standard for 3.5) in all kinds of water source may achieve good cleaning effect.
3, particle size distribution is reasonable, specific surface area is good. Product appearance spherical and angular, good gloss, the mechanical vibration three screening, grading comply with the relevant technical indicators.
4, particle size range is less than the specified limit size weight meter is not more than 3%, more than the maximum limit specified size weight meter is not more than 2%.
Anthracite filter material filling the matters needing attention and operational requirements
1, filter material must be filled in before the filter (filter) internal clean.
2, to evenly laid each layer filter material, when to calibration thickness, must rake flat filter material.
3, filter material for the long term operation, there will be wear. Such as improper operation will have "run material" occurred. Therefore need to regular inspection filter material status, if there is a deficit, material should be added in time. Such as filter material running time is too long, outlet water quality long-term not clear, or filter happen disorderly layer, the need to change or to grading filter material.
Processing and to be widely adopted double, three layer rapid filtration material. Practical in the general acid, neutral alkali purification treatment, has the good specific surface area, and all the indexes to the ministry of construction (CJ/T44-1999 standard. Anthracite filter material is special in minerals from a deep well selected, with the highest percentage of carbon content.
Anthracite filter material using artificial classification, can reduce independent minerals and reduce ash content. Also after filtering and washing, ensure its suitable for the use of water filtration. Because of its good solid keep ability, therefore anthracite can be reliably improve suspended particle removal ability. In addition, its uniformity coefficient is low, help to speed up the flow velocity.
Anthracite filter food chemical index
Analyze project appraisal data analysis project appraisal data analysis project appraisal data
Specific gravity 1.57 more than 1.8 g/cm3 material or less 3% S 0.05% content
Bulk density of 0.947 t/m3 hydrochloric acid soluble rate 0.98% Pb content 0.045%
Broken rate 0.68% or less porosity 51.99% Cu content 0.025%
Wear rate 0.32% or less uniformity coefficient K60 acuities were 2.0 0.04% Zn content
Ash powder 1.0% or less uneven coefficient K80 acuities were 1.5 combustion value 6800 kee/kg
Density 1.57 g/cm3 silt content acuities were 0.52 other heavy metal content is more than the national standards for drinking water
Inherent moisture content 90% or less 1% C or less
A, the anthracite filter material】commonly known as "stone coal", it is the deepest degree of coalification coal. Is a kind of water treatment industry filter materials. Ningxia MingYang activated carbon co., LTD. Is the production of anthracite filter material (standards: People's Republic of China urban construction industry standards (CJ/T43-2005) is to choose the high quality anthracite coal as raw materials. The crushing, screening, washing and processed. Features are: fixed carbon content is high, the density, strength, appearance luster, stable chemical performance, has good solid keep ability, can reliable improve suspended particle removal. Does not contain poisonous and harmful material. In acid, neutral water are insoluble. Compression wear resistance is strong, have plenty of specific surface area and reasonable particle size distribution. Because of its good solid keep ability, so it can improve the reliability of the suspended particle removal ability. It is suitable for drinking water and industrial water filtration.
Second, the anthracite filter material technical requirements
1, anthracite filter material crushing rate and the wear rate of the should be greater than 3% (percentage in accordance with the quality plan, the same below).
2, anthracite filter material, the average density generally not less than 1.4 g/cm3, not more than 1.6 g/cm3.
3, anthracite filter material should not contain visible mud, shale and foreign debris. Silt content should not be greater than 3%, density is more than
1.8 g/cm3 material content should not be greater than 8%.
4, anthracite filter material hydrochloric acid soluble rate should not be greater than 3.5%.
Third, the anthracite filter material】size
1, used for drinking water of anthracite range of particle size is: 0.8 1.2 mm, 1.2 2 mm; Industrial water anthracite particle size range for: 1-2 mm, 2-4 mm, 4-6 mm.
2, in various sizes of anthracite, less than the specified limit size should not be greater than 3%, more than the specified limit size should not be greater than 2%.
Packing: 25 kg woven bag packing, the lining plastic, packaging printing can provide material.
联系方式:
公司名称:宁夏明阳活性炭有限公司
地址:平罗县太沙工业园区
销售经理:刘雅
手机:15825325308
座机: 0952-5862158
传真:0952-5862158
QQ :1654292989
网址:
实拍图片:
联系方式:
公司名称:宁夏明阳活性炭有限公司
地址:平罗县太沙工业园区
销售经理:刘雅
手机:15825325308
座机: 0952-5862158
传真:0952-5862158
QQ :1654292989
网址: