主要特点：
1、特高效率-工件厚度在60-200闷闷的正常加工效率在120-140平方毫米/分钟；最高加工效率可达180平方毫米/分钟；
2、高电流--5.5A大电流长时间加工工件，最大加工电流可达8A；
3、超低钼丝耗损-5.5A大电流加工时的钼丝耗损为8万-10万平方毫米丝损1丝；钼丝连续加工时间可达48小时以上；
4、超集成--整个控制柜按集成化设计，便于维修和有效的降低故障率；
5、超厚度--最大加工工件厚度在1米以上；
6、超智能--高频内部带有采样跟踪指示，客户可根据指示调整跟踪速度；
7、低故障率--控制柜内部采用隔离式设计，操作面板采样按键式设计有效的降低故障率。

Main features:
1,specialefficient - theworkpiece thicknessin normalprocessing efficiency60-200stuffyin the 120-140 squaremm/min;up to a maximum of180 mm/minutemachining efficiency;
2,high current--5.5Ahighcurrent for a long timethe workpiece,maximum working currentis up to 8A;Molybdenum wire,molybdenum wirewear
3,ultra lowloss-5.5A high currentprocessingat 80000-10 million squaremmwire wear1 silk;molybdenum wirecontinuous processingtime is 48 hours;
4,superintegration --thecontrol cabinetis designed according tothe integrated,easy torepairandreduce thefailure rate;
5,ultrathickness-maximum workpiecethickness in 1meters of above;
6,super intelligent--withhigh-frequencyinternalsampling trackingindicator,customers canaccording to the instructionsto adjust thetracking speed;
7,low failure rate,control cabinetwithisolation typedesign,operation panelsamplingpush-buttondesigneffectivelyreduces the failure rate.