
Rating	80, 90 or 105 deg C, 300 Vac, Cable Flame.

Conductor	40 AWG - 6 AWG. Solid or stranded.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with no more than three rows of single insulated conductors or groups of insulated conductors. The length of lay of the twisted or groups insulated conductors is not specified. Fillers may be used in the cable but are not required. A barrier layer, if employed, may be fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of inpidual insulated conductors or groups of insulated conductors. Cable may employ optional steel strength member.

Covering	Optional.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000	45 mils	36 mils
	1.001-1.500	60 mils	48 mils
	1.501-2.500	80 mils	64 mils
	2.501-4.000	110 mils	88 mils
	4.001 inch or greater	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.

Subj.758	Section2	Page2661	Issued:1973-09-21
			Revised:2011-08-25