深圳市仁钢电子有限公司于1978年创立于中国深圳,是一家专业从事DC/AC散热风扇的研发、制造、销售、服务于一体的大型企业公司。主要生产交/直流散热风扇及过滤器散热系列产品。
产品具有噪音低,振动小,温升低,运行可靠等优良性能。广泛应用于小家电,音响系列,自控机械设备、电子仪器仪表等需要散热,通风,除臭等功能的产品。
随着稳健的成长,到2009年,我们拥有厂房面积达8000平方米,员工人数300多人,风扇年产量超过500万台以上。是无刷马达式直流及交流风扇行业的领先供货商。
为保证产品质量稳定性,公司一直致力于正规化管理,公司实行了ISO9001质量保证管理体系,采用标准化生产手段,实施规范化操作,并拥有完善的检测手段,确保产品质量长期稳定,并可按客户的要求定制产品。
我司品种齐全,交货及时.良好的合作关系源自于优异的品质和热情的服务。“以人为本、信用第一”是我们的宗旨。仁钢电子公司的员工比其它厂的员工要更稳定,他们是我们重要的资产,仅次于我们尊贵的客户。我们希望以优异的质量、真诚的服务、优惠的价格、获得您的信赖,愿与您携手共进,共同腾飞!
规 格 说 明 书 | ||||||||
Specifications | ||||||||
型号:CC8025B220L | ||||||||
3、机构 Mechanical | ||||||||
3-1、外观尺寸 External dimension | 80*80*25 MM | |||||||
3-2、重量 Weight | 230g(lead wire 80mm& without connector) | |||||||
3-3、轴承 Bearing | 滚珠轴承BALL bearing | |||||||
4、 电气特性 Electrical characteristics(在通风及额定电压条件下 in free air at rated voltage) | ||||||||
4-1、额定电压 Rated voltage | 220/50HZ | |||||||
4-2、额定电流 Rated current | 0.07±10%A | |||||||
4-3、额定输入功率 Rated input power | 12±10%W | |||||||
5、 效率 Efficiency | ||||||||
5-1、风扇转数 Rated speed(范围 range) | 2550RPM±10% | |||||||
6、 特性规格 Characteristics | ||||||||
6-1、 操作电压 Operating voltage range | 175V~240V | |||||||
6-2、 起动电压 Staring voltage | 175V(ON/OFF) | |||||||
6-3、 锁定电流 Locked current | 0.021A(Reference) 0.019A(Reference) | |||||||
6-4、 操作温度 Operating temperature | -10℃~+70℃ | |||||||
6-5、 储存温度 Storage temperature | -30℃~+85℃ | |||||||
6-6、 环境湿度测试 Environment humidity | 10%(RH)45℃ for 24 hours & 98% (RH) 45℃ for 24 hours | |||||||
6-8、 绝缘阻抗强度 Insulation resistance | 在本体与两条导线间加 500V 直流电压之绝缘阻抗10MΩ以上 At least 10MΩ at 500 VDC between housing and both lead wires | |||||||
6-9、 绝缘耐压强度 Dielectric strength | 必须能抵抗在本体与两线间加 1800V 交流电压1分钟 1mA Withstand 1800 VAC 1 minute 1mA between housing and both lead wires | |||||||
6-10、预期寿命(MTBF):指在额定电压及正常温度,湿度条件下连续运转。 | ||||||||
Life ecpectance:continuous operation at rated voltage and normal temperature & humidity | ||||||||
6-10-1、含油轴承预命:20000小时 | ||||||||
Sleeve bearing life expectance:20000Hours | ||||||||
6-10-2、双滚珠轴承预期寿命:50000小时 | ||||||||
Two balls bearing life expectance:50000Hours | ||||||||
6-11、端子抗拉强度 Tensible strength of connector | 端子以1公斤的拉力拉扯15秒不会脱落 | |||||||
Connector will not be any broken at 1 Kg for 15 seconds per piece. |
规 格 说 明 书 | |||||
Specifications | |||||
9、原材料 Material | |||||
项次 | 主要元件 | 材质或型式 | 等级 | UL 号码 | 备注 |
Item | Major components | UL No. | Rmark | ||
9-1 | 外框 | 铝框 | |||
Fan housing | |||||
9-2 | 扇叶 | PBT 85% + Fiber 15% | 94V-0 | ||
Fan blade | |||||
9-3 | 轴心 | 不锈钢 | |||
Stator core | Stainless steel | ||||
(SUS420J2) | |||||
9-4 | 轴承 | 滚珠轴承或含油铜轴承 | 滚珠轴承 | ||
Bearing | Ball bearing or sleeve bearing | Ball bearing | |||
(Cu+GLY)-2100 | |||||
9-5 | 线架 | ||||
PBT 85% + Fiber 15% | 94V-0 | ||||
9-6 | 矽钢片 | (H23) (H-8) | |||
Silicon steel strip | |||||
9-7 | 漆包线 | 去膜直径 0.12~0.123mm | MW-2 | 耐热 Heat resistance120℃ | |
Enamelled copper wires | Material & Specification 0.12~0.123mm | UEW | |||
9-9 | 电源线 Lead wires | 聚乙烯氧化物包铜线 | 94V-0 | ||
Polyvinyl Choride enamelled | |||||
copper wires (AWG#22) | |||||
9-10 | 贴纸 Label | 多元脂 | |||
Polyester | |||||
9-11 | 端子接头 | ||||
Connector housing | 94V-0 | 1007#22AWG | |||
10、出货检验程序 Product inspection procedur | |||||
本公司出货检验程序均依照下列步骤实施 Inspection procedures below are extremely followed | |||||
10-1、100% 生产线上电性,死角,扇叶拉拔 | |||||
100% Electric, rotating, dead spot, fan blade fasten, and primary noise test on production line | |||||
10-3、100%以手敲击测试及静音室异音过滤 | |||||
100% Strike test by hand and noise filter in quiet room | |||||
10-4、10 cm 落地试验依附MIL-STD-105E 作抽样 | |||||
10 cm drop test at random in accordance with MIL-STD-105E standard | |||||
10-5、出货抽样检验依 MIL-STD-105E 作允退判定 | |||||
Random inspection in accordance with MIL-STD-105E standard | |||||
10-6、允退标准如下 Pass/Reject standard: | |||||
加严 Critical AQL:0.4 正常 Major AQL:0.65 宽松 Minor AQL:1.0 | |||||