The diagnostic application and the associated Diagnostic Base System are installed on the application PC.
The diagnostic base system can ess the VAS 5054A via Bluetooth or USB.

ess via Bluetooth:After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.

ess via USB:You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.

The following vehicle bus systems are supported:

K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)



Package list:

1× VAS 5054A main unit
1×CD(Basis-VASPS 19.00.01-English)
1×CD(Audi-19-84-English)
1×CD(VW-Marke-19-82-GB-English)
1xCD(Seat-19-English)
1xCD(Skoda-19-English)