Φ40wire co-extruison machine configuration and quotation:

Ⅰ. Applications:

1. suitable for production of PVC insulated wire.
2. Output capacity:10-15kg/hr
3. Wire diameter:0.8mm, 1mm, 1.5mm and 2mm
4. Linear speed range:100~300m/min(this depends on the outer-diameter of the finished wire)
5. Center height of extruder: 1000mm±50mm
6. Power supply:380V/50HZ

Ⅱ. Configurations and specifications:

1.Three-shaft pay-off stand: one set

1. Adjust tension automatically
2. Suitable coil: Φ400~Φ630(we can meet customers’ special requirement.)
3. Speed of pay-off: max500m/min (broken line can be picked out) the machine can stop when there is a broken line.

2.Core line straightener:

a. In case of small line, there should be 5-pulley with V-type groove.

b. Vertical distance is adjustable

3.Main Extruder: one set

1. Screw diameter:Φ40mm   screw length/diameter: 28:1
2. New designed screw is of BM screw. It is made of high quality nitrided steel-38CrMoAIA, The surface of the screw receives the rigid treatments and gets rigid chrome plated. It features large output and excellent plasticizing, and the luster of the wire surface is good.

c. The barrels are all made of high quality nitrided steel-38CrMoAIA and are nitration austerely ording to NATIONAL STANDARD, the barrel inside surface gets grinded precisely, the harshness of the inside surface of the barrel is R2 ~R 3 degree higher than that of the peak surface of the screw.

d. Main motor power: 11kw

1. Control style: frequency conversion(Deltainverter)
2. Heating zone: 5zones     radiation zone: 3zones
3. CrosssingMould:onesets(center is adjustable)
4. Electric heating: adopts 220v/50hz (there are 4 thermostat zones for barrels andonezones for the die.)
5. Cooling-style of barrel: automatically forced high pressure centrifugal fan.

4. Electric control :one set

1. Two electric control boxes, one for mainextruder, other one for winding machine
2. Main motor and the haul-off machine can not only performinpidualbut alsocan be linkage.
3. Temp.contorller are of Taiwan Winpak.
4. The Ac contactors are ofTaiwan Shilin.
5. The inverter of this line is ofTaiwan Delta.

5.Extendable tank:

a. Material:stainless steel

b. Length: 1.5m.-2meterIt is of two-segment type.

c. Type of tank: U-type mouth of the tank, equipped with one dewatering unit. One cover on the water tank

6. Stationary water tank

1. U-TYPE. effective cooling length: 6m.
2. Material:stainless steel

umulator:

1. Style: straight style. Length: 12m.
2. Power: 1.5kw motor panies with worm thread gear box
3. 5kg ic powder clutch
4. Transmission style: multi-core tightwire.
5. Wire length: 100~250m
6. Guide pulley: Φ200mm, ten rollers to eleven rollers
7. The two ends of the umulator are equipped with the devices avoiding bumping
8. Pick-out device: synchronous equipment controlling the tension.

8. Haul off machine with two aluminum rollers.

1. Power:3hp
2. Control style: frequency conversion
3. 4-phrase derailleur of Taiwan product.
4. Pulling roll: Φ400ZL101

9.. Length Counter: one set

1. Fixed a coder
2. Can alarm when reach preset length

10. Double shaft winder

1. The wire coil without bobbin or with bobbin are available

b. The wire coil without bobbin in diameter of Φ400~500mm

c. The wire coil with bobbin in diameter of Φ630mm

d. Un-standard coil plate corresponds to the rearing hole.

e. Put the wire in order by traverse motor, and effect is excellent.

f. Power:3HP

g. Control style: frequency conversion

h. Crimping machine: made cast aluminum alloy with flexible control, convenient packing. It saves the users time and energy.