型号Type
| 减速比Ratio
| L
mm | * 空载转速R.P.M. no load
min-1 | * 转速R.P.M. S1
min-1 | 扭矩S1 Torque
Nm | * 转速R.P.M. S2
min-1 | 扭矩S2 Torque
Nm | 最大扭矩Max Torque
Nm | I max
A |
| 737 3026 160 | 160 | 156 | 31 | 27 | 0,5 | 23 | 1,1 | 4 | 5.4 |
| 737 3026 320 | 320 | 156 | 17 | 14 | 1,05 | 14 | 2,1 | 7,6 | 5.4 |
| 737 3026 640 | 640 | 165 | 7,8 | 7,3 | 1,7 | 6,5 | 4,2 | 10 | 3 |
| 737 3026 1280 | 1280 | 165 | 3,6 | 3,2 | 2,6 | 2,9 | 4,8 | 10 | 2 |
12/24 Vdc 22 W | 26Gear motor with worm screw and standard motor Ø 37x34 12/24 Vdc 5000 RPM output W, with noise suppressor.
Driving shaft mounted on two bearing and bushing. Outlet shaft supported by two bearings.
Design to give low RPM in little dimension
* The rotation speed can change of ± 10%.
The S1 load test was made using a 0,8 A corrent in the air with an increase of temperature of 70 C°
The S2 load test was made using a 1,5 A corrent in the air with a timing 5` ON 5` OFF with an increase of temperature
of 80 C° max
The starting corrent is 5.4 A and cannot be maintained for more than 2"
Max forces wich may act on the outlet shaft: Axial 25 kg, Radial 40 kg
It is possible to apply an encoder.
