代理Foredom原装进口产品，欢迎邮件咨询：kvg_zhang@
K.1070 High Speed Rotary Micromotor Kit, 115 or 230 Volt
For high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewelry making and fine detailing in wood. 115 or 230 volt. Kit includes control box, handpiece with 3/32" collet, variable speed foot control, handpiece cradle, spare pair of motor brushes, spare fuse and collet changing wrenches.The back of the control box has a convenient Voltage Selector switch for operating with either 115 or 230 Volt operation. The control converts AC current to DC cuurrent required for the handpiece.Compared to flexible shaft machines, micromotors have less torque, however, their higher speed results in a comparable rate of material removal with a lighter touch. The simple cord connection between the handpiece motor and control box is another key advantage. Unlike the "drag" and general restriction in movement that you have with a shaft and sheath, micromotors offer much greater freedom of movement.
The K.1070 Kit includes:
- HP4-917 Control Box
- H.MH-170 Handpiece with 3/32" (2.35mm) Collet
- HP4-960 Variable Speed Foot Control
- HP4-933 Handpiece Cradle
- Spare pair of motor brushes, spare fuse, collet changing wrenches.
HP4-917 Control Boxis compact with switches on the front for On/Off Power, Forward or Reverse Rotation, and Manual or Foot Speed Control. Speed can be adjusted from low to full speed using the dial on the box or with the foot pedal. An Overload Protector Light is also featured that turns red and sounds a beeping alarm when the motor stalls. This is the same control unit that comes in Micromotor Kits K.1020, K.1080 and K.1090)
H.MH-170 High Speed Rotary Handpiecehas a slender, contoured grip for precise and very high speed work and quick release rotary type chuck. It has a fan cooled, brush-type continuous duty motor that runs cool and vibration free with permanently lubricated, shielded ball bearings that require no lubrication. It comes with a 2.35mm (3/32") collet that is easy to install and change with supplied collet changing wrench.
Optional 1/8" and 3mm collets are available separately. Bur changes are quick and easy with a simple twist of the front section of the Handpiece. A cradle is also supplied for the handpiece when not in use. A selection of collet adapters is available for simplifying changes between essories with different shank sizes.
Handpiece specifications: 6.2" overall length, 5/8" grip diameter, 1" motor diameter, 7.3 oz./208 gr., DC30V/1.2A. CE marked.
HP4-927 Optional On/Off Foot Switchis available separately to turn the motor on and off without changing the speed set by the dial.
对于高速应用38,000名RPM包括轻型铸铁件去毛刺，明亮切割首饰制作精细的细节和木材。115或230伏。套件包括控制箱，机头3/32“夹头，变速脚踏控制，机头的摇篮，一双备用电机电刷，备用保险丝和线夹改变扳手控制箱背面有一个方便的电压选择开关，或者经营。简单115或230伏的操作。控制转换交流电直流cuurrent机头所需。微电机软轴机相比，有较少的扭矩，然而，其较高的速度相媲美的材料去除较轻的触摸率结果。机头电机与控制箱之间的连接线是另一个关键的优势。不同的是“拖”和一般限制在运动轴和护套，微电机提供更大的行动自由。
K.1070套件包括：
- HP4-917控制箱
- H.MH-170 3/32机头“（2.35毫米）科莱
- HP4-960变速脚踏控制
- HP4-933机头的摇篮
- 电机电刷一副备用，备用保险丝，改变夹头扳手。
HP4-917控制箱与开关电源开/关前的紧凑型，正向或反向旋转，手动或脚踏调速。从低到全速使用包装盒上或脚踏转盘速度可调节。超载保护光也变成红色，并发出蜂鸣报警时电机摊位特色。这是相同的控制单元，微电机套件K.1020，K.1080和K.1090）
H.MH-170高速旋转机头细长，精确和非常高的工作速度和快速释放的旋转式夹头轮廓握。它有一个风扇冷却，刷型连续工作凉爽和永久润滑，屏蔽球轴承，不需要润滑，振动电机运行。它配备了2.35毫米（3/32“）夹头，易于安装和更改提供线夹改变扳手。
可选1/8“和3mm夹头是单独提供的。柏迪的变化是快速和容易与简单的机头前部扭曲。摇篮还提供了在不使用时的机头。夹头适配器的选择是可用于简化不同柄大小的配件之间的变化。
机头规格：6.2“整体长度，5/8”握直径1“电机直径，克7.3 oz./208，DC30V/1.2A。CE标志。
HP4-927可选脚踏开关是开/关不改变拨号设置的速度可单独打开和关闭马达。
