独特的创新理念：

一、双腔体散热结构，将散热性能发挥到极致

   双腔体散热结构改变传统的LED植物灯散热模式，把灯体内部一分为二，形成两个散热腔体，能有效的切断内部的热力循环，从而达到极佳的散热效果。

       灯具配有独特的出风设计，在产品的两侧出风口采用敞开式排风，能将被加热后的高温空气畅通无阻的迅速排出，保证灯体的低温运行环境。

二、防滴落水设计，让灯具不受水滴侵入

       独特防水设计使得其防水等级优于其他同类产品，在产品的四周设计有5°角的防水瓦楞，加上边缘雨伞状的通风槽，使得雨水不易进入灯体内部，另外灯体的封闭式保护结构也使得产品具有较好的防尘能力。

三、高质量3W LED+700mA电流=最佳性能

    700mA电流是3W LED的最佳驱动电流，过太或过小的电流都不能让3W LED芯片发挥最佳的性能。低于700MA的电流不能让3W芯片物尽其用，浪赘了资源，而高于700mA的电流则容易使3W LED芯片过度损耗。

       要达到700MA电流的标准，不仅LED芯片的质量要过硬，而且配套的电子元器件也必须质量上乘，更重要的是整灯的散热能力要足以支撑所有3W LED所散发出来的热量。LED植物灯采用创新式散热结构和优质电子元器件，以高性能和最佳的性价比带给大家LED植物灯新体验。

四、模块化组装，易拆装、易维护

每部分设计都是遵循了模块化的理念，直接由公母插头接口互相连接．非常易于灯具的拆装、更换与维护。

五、RTPM智能控制系统（遥控、调光、定时、温控）

       RTPM系统是一种集遥控、调光、、定时、温控自定义功能和多单元链接功能于一体的多功能智能系统。通过这个系统，用户可以选择多种不同的光效方案来满足各种植物的生长需要。此外，系统自带的人性化智能操作更是让用户使用变成一种乐趣。

1、遥控、调光、定时

    整灯可遥控控制三路，亮度值为0%~100%，可整灯1%和10%加减调光亮度、单路1%单独加减调光亮度。每路可设定四个时间段亮度，在系统时间设置准确的情况下，时间到达定时时间段，整灯将会自动变为定时预设的亮度，24小时不断循环。（详细请见遥控使用说明书）

2、温控保护

当散热板温度超过65℃时，智能温度控制会自动切断供电系统，待温度冷却到50°时，系统会自动开启。

3、数据记忆

    亮度设置、定时设置将会在设定后的45秒后自动保存，下次上电工作，灯将会进入上次的亮度设定的状态。系统时间能在灯具完全断电的情况下，保持时钟持续运行大约3个月，下次上电工作，内置的超级电池又会20秒内充满，内置的超级电池无需更换。

（备注：照射面积PAR值＞10）

产品介绍：

1、采用高品质LED光源，寿命高达50000小时。

2、能够代替3~5倍功率的高压钠灯，比传统的高压钠灯和金卤灯能够节省80%的电能。   

3、高光效，90%散发的光, 能够被水生植物所吸收。但是传统高压纳灯和金卤灯来说，只有8~10%的光效。   

4、内置的冷却系统，很好地解决散热问题。 

5、输入电压AC100V~240V，适合全世界用电使用。内置电源，无其他设备的配置，直接简单安全的插头接入AC100V~240V的电压就可以工作，不需要反射镜和镇流器。  

6、灯的照射面积会根据不同的植物和环境会相应的有所改变，而且技术参数也会变化。

7、产品所有用料环符合环保的要求，不含汞、铅等有害的重金属物质。       

8、不同光之间的比例可由客户指定，我们推荐的比例是8:1，7:1:1 和7:2 ，市场常用波长为（红：蓝：橙）红光的波长为620-630nm，蓝光的波长为460-470nm，橙光的波长为610-615nm；可选择红/蓝/橙/黄/紫/红外/白混合光提供给植物的光谱需要。红光促进植物发芽，开花，蓝光促进植物生长，用户可以自主选择更合适的波长和颜色比例促进植物的生长。

产品应用：

适合于植物的任何生长时期，并且对水溶液培养或土栽培有效。适用于室内花园、盆栽、花园、播种、繁育、农场、喷栽、大棚养殖、水溶养殖、花卉养殖、温室养殖、管道式栽培等。

注意事项：

1、如长时间不使用灯具，请关掉电源开关以节能减耗！

2、禁止把灯置于水中，否则将会造成漏电对人体或灯具造成损害。

3、使用时确保产品在正常环境下使用，灯具的工作环境是-20~40℃,45%~95%RH。

4、请在打雷的时候切断电源。

5、产品在工作时切勿敲打产品。

专利号：

ZL 201230261082.7

ZL 201220212649.6

ZL 201120333047.1

ZL 201220191113.0

Unique innovative ideas:

I. Double cages structural heat dissipation design,better cooling performance

    The double cages structural design change the heat dissipation mode of the traditional LED grow light, pide the inside of the lamp to tow parts, and form two heat-dissipation cages, cut off the internal thermal cycle effectively and reach the best cooling performance.

       Use the unique air-out design and open air exhaust in the two sides of the lamp, remove the high temperature air rapidly, ensure the light body operation in a low-temperature environment.

II. Prevent drippage water design

       The lid of the light is with sloping ends and 5°angled holes to prevent the light from the damaging of drippage and dust.

III. High quality 3W LED+700mAcurrent=The top performance

    700 mA is the best drive current for 3W LEDs,runing LEDs with possibly high current can take full advantage of LEDs, making your initial investment in LED devices to be well worth it.However, LEDs and LED drivers should be of superior quality as so to undertake the high electric current, besides the entire equipment should be good enough in heat dissipating to bear all the heat emitted by 3w leds.Selects the finest LEDs and drivers to ensure the stable performance as well as the long life span of the fixtures,our three-year warranty policy proves our confidence in products.

IV. Modularity design

    Modularity design, each part interconnect by the male female plug directly, very easy for repairment and maintenance, only few steps to assemble up the whole fixture.

V. RTPM intelligent control system（Remote,Dimming,Timing and Temperature control）

       RTPM is a multifunction intelligent system, including remote, dimming, timing, custom temperature control and mult-unit chaining function. In order to meet the growth demand of all kinds plants, the users can choose various different lighting effect scheme.

1、Remote-controlled, dimming and timing

There are three controllable circuits in the light, the brightness value is 0%-100%, in order to add and reduce the adjustable brightness , 1% or 10% is available, also,  1% is allowed to adjust the brightness in the single circuit. Four time bucket can be set on brightness in each circuit. In the right system time setting circumatances, when the time reach timing time bucket, the hole light will turn into the timing preinstall brightness automatic.，24 hours continuous cycle.（Please see the remote operation instruction manual )

2、Temperature control and protection

   When the heat sink temperature over 65℃, the intelligent temperature control will cut off the power supply system automatic. The system will outo star when the temperature cooling to 50°.

3、Data memory

   The brightness and timing setting will auto-save after setting 45 seconds, the lamp will enter the setting brightness condition last time when it electrify and get to work next time. The system time will keep the clock continuous operation about 3 months after the lamp completely without electricity, the built-in superbattery will be full charged within 20 seconds. Also, it without needing battery replacements.

(Remarks: the irradiation area is base on PAR value＞10 )

Characteristics:

1. Changed mesh vents to hollow out, increase the air displacement and the cooling capacity per unit time, more convenient for carrying.

2. Using built-in quiet fans, and use the shutter in the wind, induced draft from all sides, very low noise, waterproof and dustproof, waterproof grade can reach IP32.

3. Special structure make the heat dissipation effect very good, the temperature of the LEDs' feet dropped below 50°, lowest bad loss rate of the lamp bead.

4. Use advanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damaging the lamp body.

Introduction:

1. Use high quality LED lighting source, the lifespan is up to 50000 hours.

2. Replace 3~5 times of the HPSL power, 80% electric energy saving than the tradition HPSL and MHL.

3. High lighting effect, 90% of the light will be absorbed by the aquatic plant, but to the traditional HPSL and MHL, the lighting effect is just 8%~10%.   

4. Input cooling system, well solve the heat sink problem. 

5. The input voltage is AC100V~240V，suitable for the world standard. Built-in power supply. No need other equipment, just ess AC100~240V voltage from the plug, the lamp will be working smoothly, don't need the reflector and ballast either.     

6. The lighting area and the height are changeable ording to different plants and environments, the same as the parameter.

              7. Environment-friendly, no mercury and other harmful heavy metal.       

              8. Customers can choose the different ratios, Our suggestion is red: blue=8:1 or 7:2, red: blue: orange=7:1:1. The suggested wavelength of the red is 620-630nm, the blue is 460-470nm and the orange is 610-615nm. With the mixture of red ,blue, orange, yellow, UV, IR and white lights, provide the plants needed nutrient light.  The red LEDs are good for sprouting and flowering, while the blue LEDs promote the growth, at the same time, customers also can choose the more suitable wavelength and LED colors.

Application：

              Ideal for all phases of plant growth, and works well with water solution culture and soil culture. Can be used in house garden, pot culture, garden, sowing, breeding, farm, flower exhibition, bonsai, garden, green house, sowing,breeding, farm, greenhouse cultivation, water soluble breeding, greenhouse cultivation, pipeline cultivation and so on.

Attention:  

1. In order to save energy, please turn off the power if not use the lamp in a long time.

2. Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture.

3. The working environment for the light is -20~40℃,45%RH~90%RH.

4. To protect the light, Pls cut off the power when there is a lightning strike.  

5. Don’t touch or move when the light working.