本机器采用钢板焊接结构,机身采用有限元分析设计、振动时效消除内应力，使机身稳定、可靠。

◎滑块采用扭轴同步机构，扭轴两端高精度锥度定心轴承，并加装偏心调节机构。

◎采用上模挠度补偿机构，以补偿机械加载时工作台和滑块产生的挠度，提高折弯精度。

◎折弯角度调整由减速机带动油缸内机械挡块，行程计数器显示数值。

◎工作台与墙板固定处设有调节，折弯角度微差调节方便。

◎立柱右侧设有远程调压阀。

◎墙板内侧设有手动加油泵。

◎后挡料采用精磨平板设计，调节精度高。

This machine is designed limiting limit elements analyzing and optimization made of entirely steel structure. Using libration effort to eliminate inner stress, the rigidity of machine is guaranteed.

◎Slider adopt torsion shaft synchronization mechanism,high-precision twisting axis centering taper bearings at both ends of torsion shaft, and to install entricity adjusting mechanism

◎The upper die that is equipped with urate compensating mechanism, to compensate deflection generated by table and slider when mechanical loads, can make the workpiece acquire better precision of bending.

◎The bending angle adjustment by reducer driven by a mechanical block inside the fuel tank, trip counter display value.

◎It has adjustment between workbench and wallboard fixed place, bending angle millisecond adjust conveniently.

◎Installed long-distance pressure-regulator vavle on column right side.

◎Wallboard inside with manual pumps.

◎Backgauge adopt grinding plate design, high regulation uracy.