LED灯用高品质牛角铝电解电容器
东莞市科尼盛电子有限公司
东莞市东坑镇长安塘科技路2号
产品属性
图文详情
品牌推荐
品牌/型号
科尼盛/330UF/400V 35*30牛角
额定电压
400（V）V
绝缘电阻
/（mΩ）Ω
型号
330UF/400V 35*30牛角
调节方式
固定
功率特性
大功率
频率特性
超高频
耐压值
450（V）
外形
圆柱形
品牌
科尼盛
| SHS SERIES | STHSERIES | Bitmap | KNSCHA | |||||||||||||||
| ●EGS Series large size capacitors have "self-standing" terminals | ||||||||||||||||||
| and can be directly soldered to printed circuit boards without any | ||||||||||||||||||
| fixing clamps or adhesive agents. They are easily fixed to printed | ||||||||||||||||||
| circuit boards due to the specially designed terminals. | ||||||||||||||||||
| ■SPECIFICATIONS | ||||||||||||||||||
| Series 系列 | SHS | STH | ||||||||||||||||
| Category Temperature Range | 16V ~ 100V: -40 ~ +85℃ | 16V ~ 100V: -40 ~ +105℃ | ||||||||||||||||
| 160V ~ 450V: -25 ~ +85℃ | 160V ~ 450V: -25 ~ +105℃ | |||||||||||||||||
| Nominal Cap. Range 标称容量范围 | 82 ~ 33,000μF | 47 ~ 33,000μF | ||||||||||||||||
| Capacitance Tolerance 静电容量允许差 | -20% ~ + 20 %（-10 ~ + 30 %） | -20% ~ + 20 %（20℃，120Hz） | ||||||||||||||||
| Leakage Current漏电流 | I=0.02 CV or 3(μA) whichever is smaller, after 5 min | |||||||||||||||||
| Dissipation Factor(tanδ) Low Temp. Impedance Stability at 120Hz阻抗稳定性 | 16 V ~ 100V : Dissipation factor at 20℃，120Hz shall not exceed the values | |||||||||||||||||
| given in the table of Standard Ratings 160V ~ 450V :≤0.15 | ||||||||||||||||||
| W. V . | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 | 160 ~ 450 | |||||||||
| Z(-25℃)/Z(+20℃) | 4 | 3 | 3 | 2 | 2 | 4 | ||||||||||||
| Z(-40℃)/Z(+20℃) | 15 | 10 | 8 | 6 | 5 | - | ||||||||||||
| High Temp. Load Test 高温负荷测试 | The following specifications shall be satisfied when the capacitors are restored to 20℃ | |||||||||||||||||
| after the rated working voltage applied for 2,000 hours at 85℃(SHH, at 105℃) | ||||||||||||||||||
| Capacitance Change …≤±15% of the initial value | ||||||||||||||||||
| Dissipation Factor …≤200% of the initial specified value | ||||||||||||||||||
| DC Leakage Current …≤the initial specified value | ||||||||||||||||||
| High Temp. Non-Load Test 高温，非负载测试 | The following specifications shall be satisfied when then capacitors are restored | |||||||||||||||||
| to 20℃after exposing them at the rated 85℃(SHH, at 105℃) for 1,000 hours | ||||||||||||||||||
| without voltage applied to the capacitors for a minimum of 30 minutes, at least 24 | ||||||||||||||||||
| hours but not more than 48 hours before the measurements. | ||||||||||||||||||
| Capacitance Change ...≤±20% of the initial value | ||||||||||||||||||
| Dissipation factor ...≤150% of the initial specified value | ||||||||||||||||||
| DC Leakage Current ...≤the initial specified value | ||||||||||||||||||
