产品规格： 

1．输入 

VOLTAGE：DC40V~DC58V（IPS-250DC48） 

          DC20V~DC29V（IPS-250DC24）

CURRENT：5A~10A（IPS-250DC48）

          10A~20A（IPS-250DC24）

2. 输出

注意：所有输出功率之和不要超过250W；+5V与+3.3V输入功率之和不要超过145W。

2．尺寸（长X宽X高）：150X140X86mm

3．订购信息：

IPS-250DC48        PS/2 250W ATX工业电源，直流48V输入

IPS-250DC24        PS/2 250W ATX工业电源，直流24V输入

IPS-250DC48-AT     PS/2 250W AT工业电源，直流48V输入

IPS-250DC24-AT     PS/2 250W AT工业电源，直流24V输入

细节图：

2.1  HOLD-UP TIME: 16ms(minimum)

               Test Condition:1. Full load.

                           2.DCinput48V

2.2OVERSHOOT

Overshoot at turn on shall be less than 10% of the mominal output voltage.

1.0  PROTECTION:

If the power supply is latch into shutdown stage (When OCP,OVP or short protection is working), the power supply shall return to normal operation only after the fault has been removed and should reset PS-ON for a minimum of 1 second. Then,it will turn on again.

1.1  OVER VOLTAGE PROTECTION

1.2  SHORT CIRCUIT PROTECTION

All output to GND.

4.1 REMOTE ON/OFF CONTROL

   The power supply is turn on/off by TTL signal.

   Remote On/Off Signal Characteristics

4.2 AUXILIARY +5Vsb

   This power supply is specifically equiped with an independent stand-by +5V output current, 2A max. This output will always provide +5V except when the AC line is cut-off.

4.3 AUTO RESTART

   If the power supply’s output dropped out of the regulation which is caused by AC line Voltage, the power supply will automatically resumed normal operation only after the AC line voltage returns to the specified operating range.

5.0 ENVIRONMENT:

 5.1 AMBIENT OPERATION TEMPERATURE    0℃to +50℃

 5.2 AMBIENT OPERATION RELATIVE HUMIDITY 20%  to 85%

 5.3 AMBIENT STORAGE TEMPERATURE      -40℃to +70℃

 5.4 AMBIENT STORAGE RELATIVE HUMIDITY   10% to 95%

 5.5 Mechanical Shock

     operating      : 1G peak in any axis.

     Non-operation  : 30G peak(half sine), 11ms any of orthogonal axis,in eigher direction.

 5.6 Random Vibration

        non-operation  :Freqency sweep from 2 to 200 Hz and return at a rate of 1 octave per

                  minute with constant 1G acceleration.

Operating     : 5 to 17Hz 2mm double amplitude displacement

              18 to 199 Hz 0.73G acceleration.

                           200 to 500Hz 0.33G acceleration.

                          Freqency to be swept at a rate of 0.067 decades minute.

              Dwell at resonant frequencies for 30 minutes. This test shall be

              Conducted on all three axis of the power supply.

联系：

黄生/13714030236

www.yanyuegk.com.cn