GLE数字万能充电器
产品型号GLE-906
产品性能
本充电器可充4个AA/AAA/C/D型和2个9V（6F22）镍氢或镍镉可充电池，LCD显示充电全过程，直观大方；微电脑芯片控制充电过程，通过-ΔV智能技术切断快速充电模式，并自动转换成涓流充电模式，确保电池完全充饱电而不会过充和使用安全；过流保护，恒电流充电模式将防止电流波动对电池性能的影响和确保使用安全；计时器严格控制最长充电时间，保证电池充饱(电池充饱率≥80%)的同时，确保使用安全自动识别功能，通过IC微电脑判别不可充电池，短路电池和有缺陷的可充电池，届时充电器不会充电，确保使用安全；短路保护，有防止电池正负极片短路保护功能；AA/AAA/C/D充电回路具放电功能，充电前把电池剩余电量放完可有效消除电池记效应。电池修复功能.如果电池电压过低(0-0.9V),充电器可以自行修复电池；全电压输入，全球适用；另配置DC电源输入插孔，便于汽车或其它场所使用。
产品参数
输入： 100-240V AC 50/60Hz 200mA , 12V DC 800mA；
输出：AA/AAA/C/D 1.2VDC*4 1000mA ， 6F22 9V DC 25mA；
放电电流：300-500MA
漏电电流：在室温下，装入四粒电池漏电流≤0.5mA。
空载功耗： 1W MAX；
满载功耗：10W MAX；
电池充饱率： ≥80%；
电池充饱率： ≥80%；
工作温度：0℃～＋35℃
储藏温度：-10℃～＋50℃
尺寸：108*65*28mm (长*宽*高)
重量：285g (不包含电池)
- Product features
a) Can charge 1-4 pcs AA/AAA/C/D Ni-Mh / Ni-CD and 1-2pcs 9V rechargeable batteries. LCD shows total process of charging. With nice appearance.
b) Microcomputer IC controls charging process: -ΔVintelligence technique fast cuts off charging, and changes into trickle current charging automatically. Make sure the battery is fully charged and won’t over charge.
c) Over current protection: constant current could avoid bad effect caused by rebounding current and make sure safety.
d) Timer controls strictly the longest time of charging. Make sure safety as battery is fully charged (ratio of chargingsufficiency of one battery≥80%)
e) Temperature protection: (open if ≥60℃) stop charging automatically if the temperature of charger or battery gets too high when charging.
f) Can identify automatically: through microcomputer IC to distinquish non-rechargeable battery, short-circuit battery and deficient rechargeable battery, and then does not charge these batteries to make sure safety.
g) Short circuit protect: can prevent from short circuit when positive pole connects negative one.
h) Can refresh battery: if the voltage of battery is too low (0-0.9V), the charger can refresh battery itself.
i) Discharge function,it can refresh the battery and reduce the memory effect.
j) DC power input, convenient for using in room and car.
3. Electric parameter
1、Input：100-240V AC 50/60Hz 200mA, 12V DC 800mA；
2、Output：AA/AAA/C/D 1.2VDC*4 1000mA，6F22 9V DC 25mA；
3. Dicharge current: 300-500MA
4、Consume when unloading battery：1W MAX；
5、Consume when all channels loading batteries：10W MAX；
6、Chargingsufficiency of battery：≥80%；
4. Environment condition
1、Using environment: temperature: 0-35℃ humidity: ≤95％
2、Storage environment: temperature: -25～+60℃ humidity: ≤85％
3、Self environment when working: Surface temperature of charger when charging: ≤60℃，Surface temperature of battery when charging:≤60℃。
