Product name | Plastisol ink |
State | Paste |
Packing | 25KG/drum for white, 20KG/drum for other colors |
Storage | 12 months in cool place |
Application | 1. Suitable for automatic, manual printing, can create 3D sharp up and round up effects etc. 2. Suitable for all fabrics which endurable in high temperature of 150-180 degree. |
Features | 1. High fastness 2. High glossy 3. High softness 4. SGS detecting passed, no phthalate, no heavy metal, no NPEOs. |
Mix proportion | Plastisol ink 100%, or can be intermixed with other colored plastisol inks |
Printing process | Method 1st: 1. Printing with the clear plastisol ink for 3~4 times (3-4 scrapes per time) 2. Printing again with colored plastisol ink for 2 times(3-4 scrapes per time) 3. Baking for 1~3 minutes under 150~180℃to dry it. 4. Finish. Method 2nd: 1. Mixing clear plastisol ink 50% with colored plastsiol ink 50%. 2. Printing for 4~5 times(3-4 scrapes per time) 3. Baking for 1~3 minutes with 150~180℃to dry it fast. 4. Finish. |
Attentions | 1. The fabric must endurable in hot temperature, it’s not suitable for airtight fabric. 2. Thick screen is suggested for the best effect . 3. Basement process can make better washing ability. |
品名 | 低温热固油墨 |
外观 | 膏状 |
包装 | 白色25KG/桶，其他色20KG/桶 |
贮存期 | 常温下12个月 |
应用 | 100%棉、棉/涤混纺、涤纶、深浅色布、牛仔布等各种织物，凡满足以下两点的织物均可使用： 1.能耐150C～180C； 2.有透气性，可以使油墨渗透进去。不适合的承印物比如：塑料、金属、玻璃等及经防水处理的尼龙布。 |
卖点 | 1.超强洗水牢度 2.高亮度 3.手感柔软 4.符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求 |
调配比例 | 100%热固油墨，或用不同颜色相互调配成其他色 |
工艺流程 | 1.丝网选用100-120目厚板，用丝印硬方刀75度刮印, 以透明油墨打底1-2次，印第一次时用力刮4-6刀 2.印彩色油墨2-3次（或直接印彩色油墨3-4次，不需打底） 3. 150-180度焙烘过热1-3分钟。 |
注意事项 | 1. 打底可使弹力和牢固度更好，并节省成本 2. 每次返印前需要用热风枪将墨层吹至表干，以免返粘网板
|
