说明：德国克鲁勃（KLUBER）润滑剂公司是世界的特种润滑剂生产商，其产品广泛应用于各种行业的机械设备上,符合高速、高温、高压、低速、低温与潮湿、酸性、碱性物质或空气接触之单项或多种工作要求，符合美国卫生规格FDA&USDA-H1&H2标准。有超过七十多年的生产及应用特殊润滑剂的经验,被多个外国名牌设备制造商所选用,并列入油表,成为指定使用的润滑剂。

 产品基本信息：
型号：cut CO 6-102
英文名称:KLUBERCUT CO 6-102

粘度等级：ISO VG不适用
品牌/产地：克鲁勃，德国
类型：合成金属加工油



宝贝描述：
中文：
KLUBERCUT CO 6-102合成金属加工油
说明：Klübercut CO6-102是一种人工合成的，矿物烃无金属加工油。它可分为作为环境相容金属切割和打孔流程。这种高品质的金属加工油不相溶的未经稀释的水和应用。这是摆脱问题的物质如- 胺，- 硼，-氯，- 磷，- 硫，- 重金属，- 硅胶，因而显示了几乎中性对金属的行为。

KLUBERCUT CO 6-102被列为不会危害水。在同当时，它正迅速生物降解。根据CEC L- 33- T- 82测试中，只有这样的产品正在迅速可生物降解，其降解经过21天的费率为70％以上。除了在分钟残留切屑，产品经历迅速生物降解的废料阶段并转化为一种物质不危害环境。

应用：而应用的重点是在一系列容易中等切割过程，例如的- 钻，镗，- 铣，- 锯切。此外，它也可以用于- 折叠，- 弯曲，- 步冲，- 剪切，- 冲压。Klübercut CO6-102是一个合适的数金属，特别是对- 铝及铝合金，- 有色金属，因此，但对于- 钢，- 复合材料。由于Klübercut CO6-102使用未稀释的，只有极少量是需要在摩擦点，即工具之间的接触点和工件。微剂量构成了技术进步环境方向兼容性。其优点包括：•仅分钟残油依然在切屑时，切屑可直接转移到报废循环和重复使用•没有处置冷却剂，无用于分离和处置乳液•明显改善工作环境;几乎干燥机和组件，少用或油雾油蒸气•提高刀具寿命和表面质量;未稀释的金属加工油减少摩擦和产生的热量。

包装规格：20升桶

英文：
Klübercut CO 6-102
Metalworking oil



Description:
Klübercut CO 6-102 is a metalworking
oil. It is environmentally
compatible and can be used for
metal cutting and punching
processes. This high-quality
metalworking oil is not miscible
with water and is applied undiluted.
It is free from problematic
constituents such as
– amines,
– boron,
– chlorine,
– phosphor,
– sulphur,
– heavy metals,
– silicone,
and thus shows an almost neutral
behaviour towards metals.
Klübercut CO 6-102 is classified as
non-water polluting. At the same
time, it is rapidly biodegradable.
According to the CEC-L-33-T-82
test, only such products are rapidly
biodegradable whose degradation
rate after 21 days is more than 70%.
Apart from minute residue on the
swarf, the product undergoes rapid
biodegradation in the scrap phase
and is transformed into a substance
non hazardous to the environment.
Application:
The emphasis of application is in
the range of easy to medium cutting
processes, e.g. in
– drilling and boring,
– milling,
– sawing.
Klübercut CO 6-102 is suitable for a
number of metals, particularly for
– Al and Al alloys,
– nonferrous metals,
but also for
– steels,
– composite materials.
As Klübercut CO 6-102 is used undiluted,
only a very small quantity is
required on the friction point, i.e. the
point of contact between the tool
and the workpiece.

Micro-dosing constitutes a technical
progress in the direction of environmental
compatibility.
The advantages include:
– only minute oil residue remains
on the swarf; the swarf can be
directly transferred to the scrap
cycle and be re-used;
– no disposal of coolants, no
separation and disposal of used
emulsions;
– clearly improved working environment;
almost dry machines and
components, less oil mist or oil
vapour;
– improved tool life and surface
quality; the undiluted metalworking
oil reduces friction and
heat generation.
Application notes:
The successful application of
Klübercut CO 6-102 is based on
using only minimal quantites by way
of micro-dosage. This metalworking
fluid proves its efficiency in lubrication
with extremely small quantities
and not in cooling with large quantities.
Klübercut CO 6-102 is applied to the
area between the tool’s cutting edge
and the workpiece. The product’s
excellent lubricity permits reduction
of the cutting speed and increase of
the feed rate.


We will be pleased to assist you in
selecting a suitable microdosing
system.
Minimum shelf life:
The minimum shelf life is approx.
12 months if the product is stored in
the original closed container in a dry
place.


Pack sizes:
20 l canister

Klübercut CO 6-102
• Rapidly biodegradable
• Non-water polluting
• Environmentally compatible,
no disposal
• Almost dry machines
• Almost dry tools and swarfs
• Low consumption


Product data:
Colour, aspect yellow
Density, DIN 51 757 (ASTM-D 1298), at 20 °C, g/ml, approx. 0.92
Kinematic viscosity, DIN 51 561, at 40 °C, mm2/s, approx. 30
Flash point, DIN ISO 2591, open cup, °C, approx. 300
Pour point, °C, DIN ISO 3016, approx. – 15