恒温恒湿机,高低温交变试验箱
恒温恒湿试验机,恒温恒湿箱,高低温试验箱,恒温恒湿机-贝尔专业生产
一、用途：恒温恒湿机又名环境试验机，试验各种材料耐热、耐寒、耐干、耐湿性能。适合电子、电器、食品、车辆、金属、化学、建材等工厂之用。
二、标准：恒温恒湿机可满足以下标准：GB2423.1-89低温试验方法、GB2423.2-89高温试验方法、GB2423-93试验D6交变湿热试验方法、IEC68-2-30试验方法。
三、控制方式与特色：平衡调温调湿控制系统(BTHC)，以P.I.D.方式控制SSR，使系统之加热加湿量等于热湿损耗量，故能长期稳定的使用。
四、主要技术参数：
01.型号：BE-TH-80L.150L.225L.408L.800L.1000L(M.H)
02.内部尺寸80L（40X50X40）.100L（40X50X50）.120L（40X50X60）. 150L（50X60X50）225L（50X75X60）.408L（60X85X80）. 800L（100X100X80）.1000L（100X100X100）cm
03.内箱材质:镜面或雾面不锈钢板(SUS #304 1.0mm厚)
04.外箱材质:不锈钢板(SUS #304 1.0mm厚)或冷轧钢烤漆处理
05.保温材质:硬质Polyurethane发泡及玻璃棉
06.温度范围：
H表示-20℃ ～+150℃
M表示-40℃ ～+150℃
L表示-70℃ ～+150℃
07.温度波动度：±0.5℃
08.温度偏差：≤±2℃
09.温度最低极限：
H表示-20℃
M表示-40℃
L表示-70℃
10.升温时间：平均3℃/min(非线性空载时)
11.降温时间：平均1℃/min(非线性空载时)
12.湿度范围：20%～98%R.H. 可根据要求订做至10-98﹪R.H
13.湿度波动度：±2.0%R.H.
14.湿度偏差：≤±3%
15.压缩机：法国泰康原装进口全密式压缩机
16.冷媒:环保冷媒R404A
17.控制器：
H8，M8，L8表示原装韩国TEMI880彩色触摸式智能可程序温湿度控制器；
H3，M3，L3表示原装韩国进口TEMI300液晶显示薄膜按键式数据输入；
H0，M0，L0表示原装日本进口OYO单点式控制器；
18.使用电源： AC 1ψ3W 220V或3ψ5W 380V
五、标准配置:
A. 电源线4.0 mm?x4蕊，低阻抗橡胶电缆线2.5m长1条
B. RS-232C通讯接口端子一个（9PIN）
C. 不锈钢SUS #304方型冲孔钢板置物架2片
D. 不锈钢可调整间距40mm置物架轨道2组
E. 11W节能照明窗口灯一支
F. 机体左侧ψ50mm测试孔1个附不锈钢孔盖1只,硅胶塞头1只。
G. 标准测试用不织布5片
H. 保险丝一套（易损件）
I. 控制器使用说明书一套，操作说明书一套，测试报告一份
附：可根据客户不同需求定做。
优级的服务 ：免费包装送货，免费保修一年，终身服务并提供配件及易损件
Constant temperature and humidity, high temperature test box
Constant temperature and humidity test machine,constant temperature and humidity box, high low temperature test box, professional production of constant temperature and humidity - Baer
A, use: constant temperature and humidity machine, also known as environmental testing machine, testing various materials heat-resistant, cold resistant, resistant to dry,the humidity resistance performance. Suitable forelectronics, electrical appliances, food, vehicles, metal,chemical, building materials and other factories use.
Two, the standard: constant temperature and humiditymachine can meet the following criteria: IEC68-2-30 test method for low temperature test, high temperature test method for GB2423.1-89 GB2423.2-89, GB2423-93 D6cyclic damp heat test method, test.
Three, control mode and characteristics: the equilibriumtemperature humidity control system (BTHC), using P.I.D. control SSR, the heating and humidifying system is equal to the heat and moisture loss, so it can be long-term and stable use.
Four, the main technical parameters:
1 models: BE-TH-80L.150L.225L.408L.800L.1000L(M.H)
The 2 internal dimensions of 80L (40X50X40).100L(40X50X50).120L (40X50X60). 150L (50X60X50) 225L(50X75X60).408L (60X85X80). 800L(100X100X80).1000L (100X100X100) cm
3 within the box material: mirror or matte stainless steel plate (SUS #304 1.0mm thick)
4 outer box material: stainless steel plate (SUS #3041.0mm thick) or cold rolled steel paint
5 thermal insulation material: rigid Polyurethane foam and glass wool
6 temperature range:
H said -20 ℃ ~ +150 ℃
M said -40 ℃ ~ +150 ℃
L said -70 ℃ ~ +150 ℃
7 temperature fluctuation: ± 0.5 ℃
8: the temperature deviation ≤ ± 2 ℃
The 9 lowest temperature limit:
H said -20 ℃
M said -40 ℃
L said -70 ℃
The 10 time: the average temperature 3 ℃ /min(nonlinear no-load)
11 cooling time: an average of 1 ℃ /min (nonlinear no-load)
12 humidity range: 20% ~ 98%R.H. can be customized according to requirements to 10-98R.H
13 relative humidity fluctuation: ±
2.0%R.H.
14: humidity deviation ≤ ± 3%
15: French Taikang compressor imported close typecompressor
16: refrigerant refrigerant R404A
The 17 controller:
H8, M8, L8 says the original Korean TEMI880 color touch intelligent programmable controller of temperature and humidity;
H3, M3, L3 says the original South Korea importedTEMI300 liquid crystal display film button type data input;
H0, M0, L0 says the original Japanese imports of OYOsingle point controller;
18 power supply: AC 1 220V or 3 5W ψ 3W ψ 38
Five, standard configuration:
A. power line 4 mm? X4 core, low impedance rubbercable 2.5m 1
B. RS-232C communication interface terminal a (9PIN)
C. stainless steel SUS #304 square punch plate shelf 2
D. stainless steel adjustable pitch 40mm rack rail group 2
E. 11W energy-saving lighting lamp a window
F. body left ψ 50mm test hole 1 of stainless steel cover 1, silica gel plug 1
G. standard test with non-woven 5
H. fuse a (parts)
I. controller instruction set, instruction set, a test report
Attached: can be customized according to customer demand.
Excellent service: packing free delivery, free of charge for one year warranty, life-long service and provide parts and wearing parts
