'
特点：CPU加触摸屏，切线，端子压接一次完成，操作简单，一切都在掌控中。
采用进口原件，压接采用万能压接机，噪语音小，性能稳定。高效，耐用，可搭载横，直模具。
采用步进电机控制，稳定高效。
型 号 | hw-8821 |
电线尺寸 | AWG1007#18~#30 |
送线装置 | 4轮驱动 |
能 力 | 单端压接4200PCS/小时（最短切线时） |
功 能 | 单双端剥皮、一端压接一端剥皮、可半剥留胶 |
切断长度 | 45mm-9999mm（更换部分装置时，最短可达35mm） |
切断精度 | 0.2mm+（设定长度×0.002mm） |
剥皮长度 | 一端0mm-8mm一端0mm-15mm |
压着模具 | 横送端子卡模、直送端子卡模 |
压着机 | 1.8TON万能静音端子机1台 |
控制方式 | 日本松下PLC控制 |
检测能力 | 检测有无电线、检测电线打结、检测错压着、检测空气压力 |
电 源 | 单相AC220V 50/60HZ 20A |
压缩空气 | 0.5Mpa约140N/min |
机械尺寸 | 750×550×1350（mm）（不含凸起物） |
重 量 | 约230KG |
特 点 | 1、PLC加触摸屏，切线，剥线，端子压着一次完成，操作简单，一切尽在掌握之中。 2、采用进口原件，压着装置采用万能静音端子机，噪音低，性能稳定，高效，耐用，可搭载横、直送卡模。 3、送线装置采用步进伺服控制，电线长度，剥皮长度无偏差。 |
Model | HW-8821 |
Wire size | AWG1007 # 30 ~ # 18 |
Wire feeding device | 2 drivers |
Capacity | Single-ended crimping 4200PCS / hour (minimum when tangent) |
Features | Single and double-side strip, one end of the crimp one end of the strip can be left half-strip plastic |
Cutting Length | 35mm-9999mm |
Cutting accuracy | 0.2mm + (set length × 0.002 mm) |
Stripping length | 0mm-8mm end end 0mm-15mm |
Crimping Die | Cross to send terminal card mode, direct-mode terminals Card |
Crimping Machine | 1.8TON universal mute terminal machine 1 |
Control | Panasonic PLC control |
Detection | Detect whether the wire, tie wire detection, fault detection pressing, air pressure testing |
Power | Single-phase AC220V 50/60HZ 20A |
Compressed air | 0.5Mpa about 140N/min |
Mechanical Dimensions | 770 × 620 × 1300 (mm) (excluding protruding parts) |
Weight | About 280KG |
Features | 1, PLC plus touch screen, cutting, stripping, crimping a complete, simple, everything is easy to grasp.
2, the use of imported original equipment using universal mute terminal crimping machine, low noise, stable, efficient, durable, can be equipped with horizontal, direct-card mode.
3 wire feeding device by stepping servo control, wire length, strip length unbiased. |
'
