Before you want to use the device, setup your device as following:

1. Insert SIM;

2. Insert MicroSD Card;

3. Insert the battery;

4. Hold the Power/Connect button to power on;

5. Connect this device to your terminal device.

If you want to go to internet, manage LAN, connect your terminal device to3G HOSTPOTvia USB or Wi - Fi:

To quick setup your network, make sure you have logged in; the default password is

“password”. Click“Admin Setup”to quick set your device after log in . And you can do settings as following:

WPS

WPS (Wi-Fi Protected Setup) provide a more intuitive way of wireless configuration between your device and the wireless client. Please make sure that the Wi-Fi-enabled devices you want to connect support this function.

Enable WPS firstly before you want to use it.

If you select the “PIN” way, input the client’s PIN to the "Client PIN" frame.

If you select the “PBC” way, press the "WPS" button on wireless device in 120 seconds to establish WPS connection after you have pressed the "Wi-Fi/WPS" button on your device or clicked "Save".

Click "Save" to save your settings and start connecting when you select PIN or PBC way. You can also choose "No Connection" and click "Save" to save your settings without connecting.

4.2 Internet Settings

Make sure SIM has been inserted before you start internet settings.

Network Settings

In the part of Network settings, you can configure the network mode and network selection .

In “Network mode” setting, you should select the rule for registering the network. The

default selection is “Automatic”.

The default Network Selection mode is “Automatic”. When click “Manual”, a network

list will be activated, containing all searched networks. Having selected an available

network from the list,3G HOSTPOTwill register to the selected network.