可以准确而快速的测量清洁又粗糙度的表面的波峰波谷值，完全符合国际通用标准。
先用玻璃零板校零，然后把支脚放到被测表面，探头就可测量从波峰到波谷的高度，最后取平均值，就是被测表面的粗糙度值。可精确到2微米。
此仪器还可测量腐蚀坑洞和裂纹深度。随机赠送零校准板。
此仪器还有电子数字型，R1020,精确度为1微米。
订购信息：
R1005-表盘式粗糙度仪
R1020–数显粗糙度仪
NR002-校准证书
杭州量子检测仪器有限公司作为专业的工业检测仪器设备供应商，主要产品：工业计量、物性测试、无损检测、理化分析、电子电工等多类仪器设备。 广泛应用于质检机构，工业企业，学校，工程建设等行业。公司中拥有从事各类检测技术的技术人员，为客户提供专业服务。并可根据国内外不同行业的要求，提供各种检测技术解决方案。 杭州量子检测仪器有限公司将以诚信务实，开拓创新，锐意进取，永续经营的理念推动中国检测仪器市场的发展，立足在这一专业领域上前沿。量子检测愿意与全国各地从事检测仪器的各类生产销售厂家在各个领域进行广泛、务实的合作，共同发展国内检测仪器产业。
Surface Profile GaugeThe Surface Profile Gauge allows the peak-to-valley height of blast-cleaned
surfaces to be accurately measured in accordance with theASTMD4417 Standard.
A simple-to-use Surface Profile Gauge, offering a high resolution of 1µm (0.1mils).
The blasted profile is measured very quickly and with a high degree of accuracy by operating the instrument as follows: Place the Profile Gauge on the glass plate and zero the instrument. Now place the gauge on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valleys allowing the gauge to display the peak-to-valley height.
In addition to blasted profile evaluation, this gauge can also be used for pitting and cavity depths caused by corrosion.
Readings are switchable between metric and imperial.
Complies with International Standards:ASTMD 4417-B andSABS772.
Calibration Certificates having traceability toUKASare available.
Supplied in a foam-filled Carrying Case with Glass Zero Disk.
Select Item For Pricing
Profile Gauge
The Analogue Surface Profile Gauge allows the peak-to-valley height of
blast-cleaned surfaces to be accurately measured in accordance with theASTMD4417 Standard.
The Analogue Surface Profile Gauge is one of the most economic methods of measuring the peak-to-valley height of a blast cleaned surface.
A simple to use Surface Profile Gauge, offering a high resolution of 2µm (0.2mils).
The blasted profile is measured very quickly and with a high degree of accuracy by operating the instrument as follows: Place the Profile Gauge on the glass plate and zero the instrument. Now place the gauge on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valleys allowing the gauge to display the peak-to-valley height. A number of measurements can be made to determine the average reading.
In addition to blasted profile evaluation, this gauge can also be used for pitting and cavity depths caused by corrosion.
Complies with International Standards:ASTMD 4417-B andSABS772.
Calibration Certificates having traceability toUKASare available.
Supplied in Carrying Case with Glass Zero Plate.
Select Item For Pricing
