抗静电胶板,防静电胶皮、防静电胶垫
产品规格2.0mm*600mm*10m; 2.0mm*1000mm*10m; 2.0mm*1200mm*10m
性能参数 面层（静电耗散层）电阻107Ω－109Ω 磨擦静电位＜100V
底层（导电层）电阻103Ω－105Ω 磨擦静电位＜50V
磨耗率：<0.02g/cm2静电电压衰减期:5000-500V＜1.9S
体积电阻: 107-1010ΩCM静电耗散时间：<0.5s
二. 防静电台垫(地垫) 物理性能指标
1. 拉伸强度: 3.6Mpa
2. 断裂伸长率: 188%
3. 撕裂强度(直角形): 20.6KN/m
4. 回弹性(试样由6层片材迭合): 14%
5. 冲击脆化温度(无切口)-250c: 无破坏
6. 压缩永久变化率700Cx22h. 压缩25%: 17.9。
颜色 可供颜色有绿色、灰色、兰色、等。另我司依据客户要求订做。
特点 ：防静电台垫主要用抗（导）静电材料和耗散静电材料合成橡胶等制做而成。表面层为约0.5mm厚的耗散静电层，底层为约1.5mm厚的导电层。常用为2mm双层复合结构。台垫使用时间持久，具有很好的防酸、防碱、防化学熔剂特性，并且耐磨，易清洗.导电地垫用优质导电材料合成橡胶等制做而成
Antistatic plastic rubber, anti-static, anti-static pad
产品规格2.0mm*600mm*10m; 2.0mm*1000mm*10m; 2.0mm*1200mm*10m
Product specification 2.0mm*600mm*10m; 2.0mm*1000mm*10m; 2.0mm*1200mm*10m
性能参数 面层（静电耗散层）电阻107Ω－109Ω 磨擦静电位＜100V
The performance parameters of the surface layer (static dissipative layer) resistance of 107 Omega 109 Omega friction static potential < 100V
底层（导电层）电阻103Ω－105Ω 磨擦静电位＜50V
(the bottom conductive layer) resistance of 103 Ω - 105 Ω friction static potential < 5
磨耗率：<0.02g/cm2静电电压衰减期:5000-500V＜1.9S
The wear rate: <0.02g/cm2 electrostatic voltage attenuation period: 5000-500V < 1.9S
体积电阻: 107-1010ΩCM静电耗散时间：<0.5s
The volume resistance: 107-1010 Ω CM electrostatic dissipation time: <0.5
二. 防静电台垫(地垫) 物理性能指标
Two. Taiwan anti-static mats (MAT) physical performance index
1. 拉伸强度: 3.6Mpa
1 tensile strength: 3.6Mpa
2. 断裂伸长率: 188%
2 elongation at break: 188%
3. 撕裂强度(直角形): 20.6KN/m
3 tear strength (rectangular): 20.6KN/m
4. 回弹性(试样由6层片材迭合): 14%
4 resilience (the sample consists of 6 layers of sheet laminated): 14%
5. 冲击脆化温度(无切口)-250c: 无破坏
The 5 impact brittle temperature (no incision) -250c: damage
6. 压缩永久变化率700Cx22h. 压缩25%: 17.9。
6 permanent compression ratio 700Cx22h. compression of 25%: 17.9.
颜色 可供颜色有绿色、灰色、兰色、等。另我司依据客户要求订做。
Colors available colors are green, grey, blue, etc.. Another Division I according to customer's requirement.
特点 ：防静电台垫主要用抗（导）静电材料和耗散静电材料合成橡胶等制做而成。表面层为约0.5mm厚的耗散静电层，底层为约1.5mm厚的导电层。常用为2mm双层复合结构。台垫使用时间持久，具有很好的防酸、防碱、防化学熔剂特性，并且耐磨，易清洗.导电地垫用优质导电材料合成橡胶等制做而成
Features: anti-static pad Taiwan mainly with resistance (Guide) make electrostatic materials and dissipation electrostatic materials, synthetic rubber and. The surface layer is static dissipation layer about 0.5mm thick, the bottom conductive layer about 1.5mm thick. Commonly used for 2mm double composite structure. The pad use time lasting, has good acidproof, anti alkali, anti chemical flux properties, and wear resistance, easy cleaning, conductive mat is made of high quality conductive material and synthetic rubber
